BRAAS tiles: overview of advantages and disadvantages + styling technology

Regarding roofing materials, BRAAS tiles are a well-liked option for both contractors and homeowners. These tiles are renowned for their cutting-edge styling technology, longevity, and visual appeal. Making an informed choice can be aided by knowing the benefits and drawbacks of BRAAS tiles, whether you’re building a new home or remodeling an existing one.

Because of their durability and strength, BRAAS tiles are preferred. Constructed from premium materials, they are meant to resist a range of weather circumstances, such as intense rain, snow, and wind. Because of their resilience, BRAAS tiles outlast many other roofing materials, which ultimately makes them a more affordable choice.

The styling technology of BRAAS tiles, which offers a multitude of aesthetic possibilities, is one of their most notable qualities. With the variety of colors, textures, and styles available, homeowners can easily coordinate their roof with the rest of their home’s architecture and design. BRAAS tiles are versatile enough to suit a variety of aesthetic tastes, whether you’re more into the traditional or modern styles.

Nevertheless, BRAAS tiles have disadvantages just like any other roofing material. Their initial cost, which can be more than that of some other roofing options, is one important factor to take into account. When preparing your roofing budget, it’s important to account for the upfront investment even though the durability may eventually offset this cost.

The weight of BRAAS tiles, which can be heavier than alternatives like asphalt shingles, is another factor to take into account. The weight of this material might necessitate extra structural support during installation, raising the roofing project’s overall cost and complexity.

In conclusion, BRAAS tiles present a strong option for homeowners seeking a roofing material that combines advanced styling options, longevity, and visual appeal. Through a careful consideration of the benefits and drawbacks mentioned, you can decide if BRAAS tiles are a good fit for your remodeling project.

Characterization of a practical beautiful roof

The production of Braas brand piece roofing in Russia is being handled by DSK-1, an organization that was formerly a part of the German company "Braas-Monier Group’s" global organization.

The domestic LLC manufactures traditional clay and cement-sand modifications of tiles, and after ten years, it has become a full-fledged and independent member of the International Group of Companies.

The following tile varieties are included in the assortment that both domestic consumers and citizens of neighboring countries have to offer:

• Ceramic. The warranty period calculated and provided by the manufacturer is 30 or more years. The real life of roofing ceramics about a century.
• Cement-sand. The period of trouble-free operation, guaranteed by the DKS-1, is 20 years or more. In fact, the roof with competent maintenance will spill at least 50 years in an impeccable condition.
• Composite. Multilayer roof with external protective-decorative coating from non-flowering polymer in terms of service duration is not inferior to cement-sand material. Similar and service period.

The "BRAAS" tiled roof brand’s various varieties are all made to accommodate roof pitches ranging from 18 to 55 degrees. This production’s component parts are distinguished by their precision and superior quality indicators.

Klyammers are released to fix the coating, greatly speeding up and simplifying the tiled roof device process.

Advantages of coating brand braas

German builders’ centuries-old expertise and the forward-thinking innovations of the concerned engineers are employed in the production of the highly sought-after tiles in the nation.

The following benefits have emerged as a result of the particular symbiosis:

• Unstracting in operation. The smooth outer side of the tiles prevents the accumulation of dust and dirt in the summer, contributes to the fastest snow from the slopes in winter.
• A solid appearance. Laying tile roof significantly improves the exterior of the building and increases the social status of its owners.
• Extremely simple installation. With the styling and fixation of the piece elements of this company without difficulty cope with a completely inexperienced performer.
• Resistance to external influences. Tile roofs perfectly tolerates snow drifts, storm rains, confronts gusty winds.
• Minimum moisture absorption. The material is characterized by extremely low porosity, respectively, and the ability to absorb water. During the rains, the specific gravity does not change, in winter it does not crack due to water, the volume of which increases when freezing.
• Great isolation. The roof of tiles does not let in the cold in frost, and in the summer heat retains a pleasant coolness in the house. The coating perfectly extinguishes sound waves emanating both outside and inside.
• Frost resistance. BRAAS brand tiles without losing structural ties tolerates more than 100 freezing/defrosting cycles.
• Inexplicability. Piece roofs are made of components that do not support combustion that prevent its spread. Ceramic and sand-caramic material generally undergoes high-temperature firing according to manufacturing technology.
• Color stability. Throughout the entire operational period, the color of the material promised by the manufacturer does not actually change.

The arrangement of skating and hip ridges, cornices, and yards are made possible by the style elements used in the production of the piece roof with the BRAAS logo.

Locking mechanisms that firmly secure the components to the crate and to each other are included with the elements.

It is true that the details of laying are a major benefit of all tile coatings. This causes a waterproof barrier to form from above, allowing the vapors that form inside to pass through freely.

Among the many benefits is the capacity to perform a partial coating repair without having to completely disassemble it in the event that one or more tiles are damaged.

A few, but noticeable shortcomings

Like any other building material, the ideal roofing has not yet been discovered. Braas tiles are not an exception; they still have drawbacks, and they are as follows:

• Impressive price. Disadvantage, more characteristic of ceramic roof, t.To. The cost of cement-sand and composite material is significantly different from it.
• The need for clear compliance with the installation instruction. The laying of the tile does not allow deviations from the thoroughly scheduled technology. In case of violation, partial exposure of roofing areas, collapse, water accumulation is possible.
• The complexity of styling. The piece coating of any brand is mounted much longer than the large -leaf roof is laid.

The requirement to cut component parts in order to arrange holly structures and roofs with mhargers is one of the drawbacks. This work will inevitably involve more than just installing metal or profiled tin tiles.

By evaluating the qualitative aspects of the piece roof and weighing the benefits against the drawbacks, you can determine whether the Braas tile is worth spending a significant amount of money on and dedicating many days to maintaining. Usually, neither of these things is a barrier for those who are drawn to the aesthetics of roofing ceramics.

"BRAAS tiles are a compelling option for roofing because of their unique combination of cutting-edge styling technology, visual appeal, and durability. These tiles are a dependable choice for long-term roof solutions because of their benefits like longevity and weather resistance. They do, however, have certain drawbacks, such as upfront costs and specific installation needs. When choosing roofing materials that combine practicality and aesthetic appeal, homeowners can make more informed decisions if they are aware of the advantages and potential disadvantages of BRAAS tiles."

Rules for the construction of a tiled roof

For centuries, roofing technology has been "polished" using tiles. Observe that after all this time, not much has changed, save for a slight improvement.

The BRAAS tile elements feature two non-watering holes to speed up and ease the laying process. These holes should be finalized for fastening with a drill bit that is Ø 6 mm and made specifically for concrete work.

Note right away that not every tile needs to have a hole made in it. Let’s decide what needs to be done and how.

Preparatory process before laying

A crate from a bar with a side measuring between 30 and 60 mm is required for the device of all tiled roof types. Coniferous rocks are appropriate, and the review has been removed entirely from them. The bearing capacity is decreased when knots are present, which is prohibited.

The base under the roof’s pile material needs to go through chamber drying before its humidity level can go above 25%. It is advised to treat antiseptic impregnations and anti-pires prior to laying the solth.

The size of the bar is determined by the spacing between the rafterins, which also affects the installation process. A 30 × 50 mm material is appropriate for a reshetin device if the rafters were installed after 0.75 meters. 40 by 60 mm reshetins are installed on rafter frames that are constructed in 1.1 m steps.

The intervals between collapses are also influenced by the roof’s steepness. A step can be greater the greater the slope. The range of the difference is generally not too great, ranging from 31.2 to 34.5 cm.

There is no step between the first pair of reshetin in the specified rule. This distance can range from 32 to 39 centimeters. The size is entirely personal and is determined by the master’s chosen roof overhang as well as the ceramic tile’s edge’s placement in relation to the drainage system’s gutters.

A free overhang does have a limit, though. The tile should not close the gutter by more than one-third of its width, nor should it extend beyond the crate’s extreme line by more than 7 centimeters.

As per the planned crate, a coated construction lace is used for marking prior to the commencement of roof construction. Mark all three tiles in the horizontal columns. Of course, the marking varies according to the actual piece roof size of a given collection.

Installation and fastening of piece roof

There is no specific tool or equipment needed to lay and fix tiles, but it is advisable to have a safety belt on hand. Tiles are arranged in small piles of five to seven pieces along the edges of the prepared base for convenience.

Not every tile is fastened to the crate with fasteners in areas with low to medium wind loads. Required are set in stone:

• Tiles of the lower rows, t.e. first with the edge laid along the cornice overhang.
• Elements of the upper rows, t.e. The very first from the skate line.
• Tiles of side columns adjacent to the edge of a pedimon overhang.
• Solid and half -tiles located next to the fake ribs, lines of yends, panoramic windows, stoves, ventilation shafts, viewing hatches, etc.D.

All tiles must be fixed in areas subjected to high wind loads. Proceed in a similar manner if the structure is 60 degrees or more steep.

Every tile in the Braas brand has two "outlined" holes, which has already caused us concern. These holes must be drilled first, and only in the tile that needs to be fixed, in order to attach the tiles to the crate.

The mounting of the tile elements is done using 4.5 × 50 mm galvanized screws in the upper part. Anti-vein universal clamps, also known as klyammers, are used to secure the tiles at the base of all kinds of piece roofs starting from DKS-1. Somewhat different-designed clamps are also used to secure cut elements.

Because both types of clamps have wire attached to them, tiles are drawn to reshetins. A clogged nail and a tile-attached clamp are used to secure the element into the closest collapse. The clamp is fastened to the element using wire. It is acceptable to use a wire’s edge in place of a nail if it is fastened to the fasteners in a reasonably strong manner.

Cadnial and pedimental overhang

The rafter frame as a whole and a lengthy roofing service depend on the skillful device of the cornice overhang.

The overhang is necessary for the roof to function normally:

• Provide ventilation. At the expense of the crate and the counterparts, ventilation ducts should be formed – the vents passing from the line of the cornice to the skate line.
• Guarantee a complete collection of rainwater. The rain jets flowing through the slopes should fall directly into the drainage groove attached to the cornice overhang, to fully assemble it and be taken to the drainage riser.
• Increase aesthetic attractiveness. The overhang clicks all the unsightly sides of the construction, being a kind of final stroke of the exterior picture.

In the cornice overhang zone, ventilation duct ends are typically sealed with ventilation tape or an aero-element mesh structure. They allow air to flow freely but keep dirt, dust, and insects out of the roof.

In the event that the low-rise house’s roof lacks a drainage system, all work is completed in the same sequence. It is also not possible to install the protective structure or ventilation tape, but the ventilation ducts still need to be arranged.

The maximum amount of overhang that is allowed is 30 centimeters. The company creates aluminum lightweight options or side elements made of similar material for aesthetically pleasing arrangements. The boards must then be beaten along the front-line lines in order to be honored since they cannot be used.

Arrangement of skating and hip ridges

Utilizing galvanized metal holders, tiles are laid on skating and hip ridges. To secure the ridge bar, they are nailed to the crate’s upper ribs.

Fixation of the company’s produced ridge elements is done to this exact bar. To do this, the holes on the skating and hip elements must be scored in the same manner as the galvanized nails.

Before putting in skating or hip tiles, airuelon is laid out on a ridge block. You have three options in this situation: figarol, metroll material, or AFE tape. Every 30 centimeters, the first option on the list is nailed to the ridge bar; the remaining options are just glued.

Recall that confusion can occur in any weather condition, independent of temperature and bar humidity. Gluing can only be done on a dry base, and +5º should be the minimum air temperature while the work is being done.

Skating tiles are placed on a ridge ridge after being laid on a follic ribs in the arrangement of hip structures.

A unique holm protective-decorative detail covers the joint of the ribs, preventing moisture from penetrating inside the roof and hiding an unsightly area.

Skating galvanized clamps are used to fix the tiles made specifically for the ridge design. A metal ventilation grill is positioned on the end of the end tile or end of the ridge arrangement at its conclusion.

The specifics of the design of the mosses

In the roof structure, the concentrated corner is not the easiest location. The crate is either continuously made or greatly increased in the area of its device. This amplification’s width measures 30 centimeters from each side of Endova’s central axis.

When the corner is larger, a metal groove is placed on it, and the edge is then cut with scissors to make metal in accordance with the real indications. The groove is positioned starting from the overhang of the cornice and is bracket-mounted along the side line. Only net it from the top.

If there weren’t enough planks to overlap the entire yendova, the gutter’s corner joints and the overlap between the boards were sealed with tape. The indicated manipulations are completed before the piece roof is laid.

Cut tiles are laid in the light, of course. The yendov line must first be marked with a coated lace or marker in order to create a lovely edge. The Yendov region must typically be marked with a margin of about 15 cm.

Next, they arrange the components in an overlapping solid tile, but they do this only for fitting purposes—that is, without fastening. To achieve the most precise cutting, the previously planned line is moved to the tiles. Tiles that have a cut line are numbered to prevent confusion.

There is cutting on Earth. It is unauthorized and dangerous to be on the roof. It’s not guaranteed that it will be neatly and evenly chopped off, and there’s a chance that an already-installed roof could sustain damage.

To ensure that no dust remains on them, the tiles are cleaned after being cut. Next, the lighting components are arranged based on their numbers so that the cut aligns with the groove’s designated line.

Sealing passages through the roof

In order to prevent water from seeping through the roof’s weaknesses, communication pipes, chimneys, and ventilation shafts must be sealed.

The aisles are arranged using three different techniques: conventional metal aprons, Vacaflex waterproofing tape combined with the HAS adjustment straps, or self-adhesive ribbons from the brand.

Installing paired elements is a requirement for all types of passage arrangement. The first "series" is installed on a crate prior to the piece roof being laid, and the second is installed after to prevent water infiltration.

When using a labor-intensive method with roofing tin aprons, the outcome isn’t always flawless, particularly if the contractor lacks experience in the field. However, this task can be completed on any day, without even considering the roof’s moisture content.

Using self-adhesive materials makes work much easier and allows for intensive work to be completed at a faster pace. However, the roof must be completely dry and at least +5º in the yard before the material is adhered to it. In the event that they are not visually "fixed," the ribbons will not stick and will quickly move away from the surface.

Self-adhesive lead ribbons bearing the Vakaflex logo are also employed for organizing connected structures, multi-level buildings, and roofs that are broken. Before installing the tile roof on the portion of the slope that is above it, the horizontal corners that are bent and convex are adhered with stripes.

The guiding principle—that the constructive element above should close the component beneath it—is always followed. This plan, along with the application of self-adhesive ribbons, have created an impenetrable barrier for atmospheric water. Without any resistance, she rolls down the gutter or straight to the ground.

The materials provided as an example and the methods for organizing passages and junctions are applicable to more than just tiling a roof. They are effectively employed in the production of all varieties of comparable roofing coatings.

BRAAS roofing tiles are an attractive choice because they combine practicality and visual appeal. Their benefits include weather resistance and durability, which make them appropriate for a variety of climates. BRAAS tiles are renowned for their durability; they can go for decades without suffering major deterioration. Long-term costs are reduced due to their low maintenance requirements and dependability.

The aesthetic appeal of BRAAS tiles is enhanced by styling technology, which enables homeowners to tailor their roofs to complement particular architectural motifs or personal tastes. BRAAS tiles provide design versatility, whether they are used to achieve a sleek, modern look or to mimic more conventional materials like slate. This flexibility guarantees that roofs add curb appeal and value to a home while protecting it from the elements and improving its overall appearance.

BRAAS tiles have drawbacks despite these advantages. Budget-conscious homeowners may be discouraged by their initial cost, which can be higher than that of some other roofing materials. Because installation involves specific techniques, it also calls for the expertise of skilled professionals. To get the most out of BRAAS tiles and steer clear of future problems, proper installation is essential.

To sum up, BRAAS tiles offer a practical, fashionable, and long-lasting option for roofing. Their fusion of cutting-edge technology and stylish design provides homeowners with a dependable choice for safeguarding and enhancing their properties. Making educated decisions about roofing options requires an understanding of the benefits and factors related to BRAAS tiles.

Video on the topic

Installation of cement-sand (natural) tiles BRAAS

BRAAS tiles cracked in Endov. Reasons and decision. Delta Vent N 5 years later.

BRAAS – tile Taunus

Cover with tiles BRAAS – just!

BRAAS tiles

Installation cement – sand tiles

Overview on the assortment of the tiles of Braas