The end cap, or endova, is a critical component of metal roofing that is frequently overlooked but is essential to its operation. The endova, which is made especially for metal tiles, is a finishing and protective element that guarantees the strength and beauty of the roof.
The endova’s main purpose is to cover the exposed ends of metal tiles. This keeps dirt, water, and small animals from getting under the tiles, which could eventually cause the roof structure to deteriorate or sustain damage. The endova extends the roof’s lifespan and overall weather resistance by firmly sealing off these weak spots.
Endovas for metal tiles are usually constructed from weather-resistant materials like coated steel or aluminum, which are selected for their resistance to UV rays and other outdoor factors. Because of its durability, the endova not only enhances the appearance of the roof but also consistently guards against rust and wear, increasing the roof’s lifespan.
Apart from its practical uses, the endova is essential for improving a metal tile roof’s aesthetic appeal. It blends in perfectly with the tiles to provide a polished and unified look. It is available in a variety of colors and profiles to match different roofing styles. This visual integration enhances the property’s curb appeal and gives it a polished appearance that both builders and homeowners value.
Benefits of Endova for metal tiles: | 1. Provides a clean and finished look to the roof. |
2. Helps prevent water leakage and damage. | 3. Enhances the overall durability of the roof. |
- Installation of yards on a roof made of metal tiles
- Varieties of yends
- Features of different types
- Installation of yendov
- Endov installation circuit on the roof
- Endova function
- Varieties of assembly options
- Instruments and materials for installation
- Installation instructions
- Endov
- Endova for metal tiles
- The specifics of the tiled yendova
- Constructive subtleties
- Necessary tool
- Installation of yendova
- Video on the topic
- Endova on a metal tile. #work #roof #construction #house #house #repair #life
- Endova on a roof made of metal. Fragment of the film on the installation of metal tiles. UNNIKMA.
- Installation of the valleys of metal tiles. New Toksovo. Day 21.22.
- Endova on a metal tile. How to do the right thing.
- Installation of yendovs with an exit on a slope on a roof made of metal tiles. Installation of metal tiles. UNNIKMA.
- The nuances of the Endov mounting. The basics of waterproofing of the adjoining of two slopes.
- Installation of yendovs with access to the main slope
- Installation of metal tiles. Function of two yends. UNNIKMA.
Installation of yards on a roof made of metal tiles
For installation of a strong and durable roofing system made of metal tile, it is not enough to only purchase and correctly fix the coating itself, it is also necessary to take care of the installation of many additional elements. Such details are not just a decorative addition, many of them have protective functions. In particular, without fail, when covering the roof by decorative material, it is necessary. This element allows you to create the external and internal corners of the roof, that is, it makes the roof structure more complex, multifaceted and aesthetically attractive. However, its main purpose is to reduce water from the surface of the roofing system. It is very important that the yendov for the metal tile is correctly selected and fixed. And for this it is worth knowing what similar gutters are, as well as how to competent them competently.
Varieties of yends
Endova, then, is a roofing connecting element that resembles an angle or gutter. Installing the product at the intersection of two slopes is a requirement for a complex roof. They may appear differently depending on where they are. Two subspecies of the areas are typically distinguished based on the installation option and intended use.
- Lower or internal – mandatory detail of the roof of metal tiles. It is equipped with special guns at the edges, thanks to which water does not fall into a subcutaneous space. Mounted until the installation of the main coating starts.
- Upper or outer – such an element has more decorative function than protective and necessary to hide the joints of the metal tile and giving them aesthetic species. Mounted on top of the finish coating above the lower end.
Crucial! It is important to choose the mounting location for the upper gutter carefully to avoid damaging the lower plate. Apart from being categorized based on design, this roofing component can also be classified based on the kind of roller connection:
- open – the peculiarity of this element is that when water gets on it, the liquid is removed without problems by gravity, most often it is installed on simple roofing systems and on slopes with a small angle of inclination;
- closed – such a part is used in the case when the docking places form an acute angle, while the element itself is completely closed with a roofing, that is, the sheets of the metal tile are tightly connected above it;
- intertwined or articulated – has a resemblance to a closed apple, that is, the metal tile is located above it, but at the same time, some rows of material are intertwined in places of docking.
Which particular option you select will primarily depend on the roof’s slope; also see the metal tile roof’s angle of inclination. Furthermore, every species has some benefits and drawbacks.
Features of different types
It is advisable to weigh the main advantages and disadvantages of the various options for end installation before disclosing such a question as the device of the yendova of the metal tile roof.
- The advantages of the open gutters include the fact that it allows the water available on the roof quite quickly to drain down, in addition, it is easy to install such an element. Since precipitation does not accumulate on the roof, but immediately diverted from it, it is possible to exclude the stage of additional waterproofing of the junction of the metal tile. However, the open gutter does not differ in high aesthetics and presentability, which means that there is no need to talk about a luxurious form. This version of the Yendova device is perfect for the buildings of simple configuration.
- The roofing system with a closed apple has a more attractive appearance. It is important to take into account that mounting such an element is much more difficult than an open option, in addition, you need to take care of a high -quality waterproofing layer.
- The intertwined Endov is distinguished by almost all the same advantages and disadvantages as the closed. Of course, it is more difficult to mount this element than the previous two species, but the appearance of the roof with the articulated apple looks respectable and unusual.
The owners’ preferences are a major factor in the choice they make, but the roofing system’s mechanism also plays a role. Endov is constructed from a metal tile consisting primarily of galvanized steel sheets. The high strength and dependability that each type of yend has in common can be seen as an advantage. Elements can be used for many years because the material has a high level of corrosion protection, even in harsh weather. All of this, of course, is only valid if each component of the finished roofing is installed skillfully.
Installation of yendov
It can be generally concluded that installing the yendov metal tiles is a task that is easily completed on its own. Naturally, you should thoroughly familiarize yourself with the installation technology and all of the intricacies of the process before moving forward with its implementation. You will require the following tools for work:
- Scissors for metal
- roulette, ruler and pencil;
- The clamp of the tin.
There are five steps that can be applied to all installation tasks.
The first thing to do before starting the installation of yendov with a roof with a metal tile is to install a roof crate. The peculiarity of the crate in the places of attachment of the yendova is that at the point of the docking of the two planes of the roofing, it should be continuous, that is, a beam or board joke closely without gaps. It is also required to lay the crate in the same way and where the slope of the roof adjoins the windows of the attic or attic, since this place will require the installation of the apple plank. In parallel, the edge of the gutter should be laid down boards that would be additionally protected from moisture and fungal formations. The width of the lining beam should be such that approximately 300 mm is directly under the apple, and the thickness corresponds to the parameters of the counterparty. It is to this beam that the internal gendov will subsequently be recorded. See also: Chatter for metal tiles.
At this stage, only additional waterproofing is produced directly under the gutter, since the main hydro- and vapor barriers are located under the crate. These materials can be laid both before the stage of installation of the crate, and after the operation of the roofing is completed,. The second option is suitable if the attic or attic is planned. As for the waterproofing of the yendova, this procedure will help to avoid any possible leaks. Since, if moisture nevertheless falls into a subcutaneous space, it will take quite a lot of effort to replace the gutter, because in this case it will be necessary to disassemble the slopes adjacent to the element from both sides. Therefore, the best option is to protect the place of junction of roofing coatings as much as possible. So, the installation of yendovs under the metal tile begins with waterproofing. As a given material, you can use a special apple carpet, which consists of a non -woven canvas impregnated with modified bitumen. The carpet is either glued in the presence of a glue layer, or nailed with nails to the crate. See also: waterproofing of a roof of metal tiles.
How to install the lower yendova
Next, you can proceed to the direct installation of the valleys. Lower or Falzhendova has the form of a gutter, that is, a metal plate bent at an angle that can be adjusted in accordance with the slope of the slopes. At the same time, its edges are also bent inside, which eliminates the flow of water past the gutter. It is worth saying that Endov for metal tiles can be smooth or embossed, that is, it is covered with a special sprinkle. However, it is recommended to choose exactly a smooth plate, since moisture and garbage will not accumulate on it. Having placed the gutter at the place of constant installation, do not immediately fix it to the crate.
Important! It is advisable to install the element not along the entire length, and not reaching the extreme lower point of 60-70 cm. In this area, an additional yendov is then fixed. It will be much easier to work with the material. It should also be borne in mind that the groove from the constituent elements should be laid overlapping, that is, with an overlap of 10-20 cm. In this case, the plate located below should be instituted under the part located above. If you need to cut the groove or bend its edges, then the appropriate tools should be used, that is, the scissors for metal and the clamp of the tin. When the installation work is completed, that is, all the details are clearly adjusted in size and recorded on nails or screws according to the instructions, the universal seal should be laid on the right and left of the valleys.
Metal roofing is installed in compliance with the pre-compiled project plan. Additionally see: The metal tile roof device.
Setting up the Upper Endov
The top bar is installed when all work is finished. This component is purely ornamental, and it might not even be installed in some circumstances. That is, only the inner gutter should be covered by such an Endov. It is similar in appearance to the main roofing and lacks significant strength in this regard. Naturally, even though it is ornamental, it needs to be carefully fixed, paying attention to the 10-15 centimeter overlap that is required, and closing the fit of the fitness to the metal tile in a qualitative manner.
Thus, the installation of yendova with a roof with a metal tile is considered the completed. It remains only to properly care for the strips, clean them of accumulated garbage, and if necessary, update the upper layer with protective compounds. It is not worth saving on such material, since it is on the gutter that the whole main load is provided by sediments. Therefore, when choosing, it is important to pay attention to the quality of these elements. Endovs are necessary for almost all types of roofs, but before proceeding with their device, it is worth carefully considering the plan of their location, create a project and then act according to the documentation.
Device, types, and yendov installation on the metal roof. Features of the crate installation, including the upper and lower yendova and waterproofing.
Endov installation circuit on the roof
Classic gable roofs consist of just three components: the skate, which is the outer angle, and two slopes. However, what is the yndov roof and where is it located? If you add more elements, like multiple slopes or auditory windows, this element is created. Internal angles, also known as values, call for specialized waterproofing. We will learn the characteristics and variations of this useful component as well as how to construct a yendov on the roof independently.
Endova function
Endovaya is aware of how two slopes in intricate multi-protrusion roofs conjugate. Being one of the most intricate parts of the roof, the device technology must be used with extra caution. The following functions are carried out by Endova for metal tiles and other materials:
- The unification of the slopes. If the roof is made of simple leaf or soft material, then there are not so many difficulties in conjure. But the device of yendovs from corrugated board or metal tiles is not a simple matter, so this roofing material has ledges.
- Dispatch of water. Since this element is in the inner coal of slopes, all rain and melt water flows to it. It turns out that Yandova protect the attic and a roofing pie from moisture penetration.
- Holding snow. In winter, a large amount of snow gathers here, more than on slopes. Therefore, the element should withstand both large loads and gradual thawing of ice with snow.
The project and thorough calculations should go hand in hand with the yendova device on the metal tile roof. He considers the abduction of moisture and the snow load.
The image illustrates the proper way to install Yandov.
Varieties of assembly options
The diagram below displays the different types of the roof’s yendova:
A roof featuring an intricate system of rafter supports typically has multiple skates and internal corners. The frenum between the slopes has a high probability of leaks, based on statistics. Prevent this issue by using technology that installs the yendova roof from metal tiles precisely. The element can be assembled in one of three ways:
- Open. If the roof has a slight slope, then they prefer this technology. A special groove is laid between the slopes between the slopes.
- Closed. Closed yendovs are used on structures with a steep slope. To do this, make a tight adjustment of the roofing sheets, and the element itself is installed under the coating.
- Intertwined. In accordance with the name at the junction of the roof sheets intertwine. This is how a sealed compound is formed that protects against sucking moisture. Usually used on a soft roof.
Gathering the yendov, the jurisen of the adjoining two slopes, requires the use of multiple details: upper yendov, which gives the element its beauty, and lower yendov, which keeps moisture from seeping under the roofing pie.
Instruments and materials for installation
Once we have determined the yendova on a complex roof, you can start getting ready for the installation. Acquiring the required materials ahead of time is crucial to ensure uninterrupted construction. Should this not happen, the rafter frame’s strength could be compromised. Thus, make sure the following components are present before moving forward with building the roof with the inner angles:
- roofing material (metal tile or corrugated board);
- end, roofing and ridge strips;
- self -tapping screws with sealing washers;
- guide boards;
- Object boards;
- waterproofing film or membrane;
- seal;
- Decorative parts.
But the right tools are needed in order to complete the installation right now:
- For trimming metal elements, special scissors are needed, they can be electric or manual.
- The battery screwdriver will be preferable to a wire.
- Medium -sized hammer.
- Measuring tool, for example, roulette.
- Construction pencil, marker or chalk for marks.
- Ladder, since not all elements can be performed on the roof.
- Cables and ropes for insurance at height.
- Protective glasses for cutting metal and gloves.
You can begin installation work only after you have purchased all the required materials.
Installation instructions
We’ll work out the correct way to make a yendov. First, it’s critical to set up a solid foundation. It aids in withstanding heavier snowfall, a significant amount of melt, and rainfall. To accomplish this, take the subsequent actions:
- In the place where the light is installed, it is important to strengthen the crate. Usually it is made a continuous cross -section of 40×150 mm from a trimmed board. Fixed with nails at a distance of 600 mm from the center of the junction. This design will evenly distribute the load on the rafter system of the multi -plot roof.
- In addition to additional strengthening the base, a waterproofing layer will require. It is spread on top of the crate, to ensure protection against moisture penetration. For greater reliability, several layers of insulating material should be made.
- Now, using self -tapping screws, the installation of yendov under metal tiles. One of the installation conditions requires an overlap of roofing material at a distance of at least 200 mm. If the length of one bar is not enough to cover the entire angle, then additional flaws are laid with an overlap of 250-300 mm.
- After that, you can lay the metal tile so that from the center of the groove to the edge of the roof sheet is 60-100 mm, and process the joints with the seal. For this, a self-adhesive fixer tape is attached to the places of contact, and glue-mixer is applied to it. When covering the roof by a profiled sheet or metal tile, follow the evenness of the corner sections.
- Now they mount a decorative corner, or the upper plane of the valleys. Special sealing self -tapping screws with Presshab acts as fasteners.
The method used to fasten the roof’s yendova beneath the corrugated board is the same as that of the metal tile.
Endov
It is crucial to securely fasten this useful component of the roof to the base in order for it to last for a long time and prevent mishaps like leaks. As a result, mounting foam is used to seal all joints and gaps and secure the lower bar to the crate. Regarding the upper bar, extra focus is placed on its appearance here. Thus, they take care to cut evenly and avoid scratching the outer layer. All of the screws that are used to secure the land are only inserted into the waves of roofing material.
They are attached to the false end every 30 centimeters if mistakes were made in the upper yendova installation and the consequences are noticeable.
Endova is the color chosen for the metal tiles in order to preserve a uniform look for the entire roof. It is advised that installation work be completed concurrently with roof flooring and that the case not be put off for several months. You won’t have to worry about leaks once all installation requirements are met; this type of roof will endure for ten years.
Endov features for the assembly options scheme and roof. tools and supplies needed for installation. guidelines and advice for installation.
Endova for metal tiles
One crucial component of the roof structure is the endova for the metal tiles. These days, metal tiles are frequently used to roofs of many different kinds of buildings, and the roof itself is made up of a variety of joints that come together to create a beautiful design. By installing the values, you can connect various roofing joints and solve the problem without compromising the roof’s dependability. Even though you can install these components by hand, the work still needs to be done carefully and accurately.
The specifics of the tiled yendova
Endov, in most cases, is a roofing structure detail that creates the inner angle between the roof’s slopes. Eliminating water rolling from both articulated surfaces and making sure the roof in this area is tight are the primary tasks that it helps with. Furthermore, because it’s a type of roofing, snow accumulation places a heavy burden on the inner angle, necessitating further requirements.
Endova needs to consider the details of the metal tile roof. First of all, the coating elements have a profiled (typically wave-shaped) surface that makes sealing difficult and the metal that forms the structure’s foundation problematic. The installation of such a roof unit is generally subject to the following requirements: making sure that water drains outward while completely free of leaks and any roof deformation in this area (sagging, swelling, divergence of tiles, etc.D.).
Constructive subtleties
Image 1: Open Endov plan.
Galvanized steel sheet is the best material to use in the production of Endova because it can ensure dependability and has the required resistance to atmospheric influences. The structure typically consists of two main parts: the internal (lower) and external (upper) yndov. This ensures protection against water leaks. An additional crate gives this part of the roof its strength.
The lower bar installation is done to the tile coating flooring and acts as a stopper against potential leaks. The upper endova is installed following the primary coating’s flooring.
It does two things: first, it creates a groove for the water, and second, it gives the whole node a suitable visual appeal. There are three primary methods for performing the yendovs for metal tiles in terms of structure: open, closed, and entwined systems. The roofing node in question, regardless of type, has the following structural components: values, improved crate, and waterproofing (apple carpet).
Start building now. Fig. 1 provides an example of how the yendova’s open design is implemented. Such a system’s primary function is to maintain the space between the slope’s joined surfaces, where a metal strip is installed. It creates a drainage groove that runs lengthwise. The dialing channel of the gutter is fixed between two parallel bars, each of which is connected into the overall lattice structure (rice.1. Open -type yndova), strengthening the node.
The gutter can have a rounded or rectangular shape. Following the gutter border, the side sections of the strip are bent at an angle equal to the corresponding slope’s corner.
Figure 2: Yendov, open.
Sewing is formed on the strip’s longitudinal edges as an edge bent upward to remove water. Underneath the tile, the strip is installed on the crate. You can choose not to include the lower yend bar during installation.
Closed type. The closed version of Endova implies the joint of the tile coating of slopes. In this design, the entire set of elements is necessarily mounted (waterproofing, lower and upper bar). The lower bar is made of a metal strip with a Mr-shaped profile and a side of the edges. The wooden base under the strip is made of a board with a width of at least the width of the side of the bar or bars installed in the end to each other. The lower bar forms a triangular groove for the removal of leaked water and is fixed under the tile. An external strip of metal is attached on top of the jointly tiled slopes, which repeats the inner angle formed by slopes. This strip forms the main groove for water drainage.
Intertwined option. The intertwined type of yendova is made by bending the ends of the tile elements. For this, the metal tile is laid 150-200 mm beyond the connection line. On the joint line of the roof slopes, each element bends at an angle. Such actions are performed on both sides, which ensures the formation of a gutter from the tile elements themselves. Given the fact that the directions of laying tiles on the slopes are at an angle to each other, there is a mutual overlap of elements. It is advisable to treat the junction of the joint with sealant. The outer bar is attached from above, which performs more decorative function.
Necessary tool
The following tool is needed to install yendovs for metal tiles:
Figure 3: Waterproofing scheme by Endov.
- Bulgarian;
- electric drill;
- screwdriver;
- hacksaw;
- knife -haired carbon on metal;
- plane;
- file;
- hammer;
- kiyanka;
- painting brush;
- putty knife;
- devices for bending the metal strip;
- pliers;
- scissors for metal;
- scissors;
- stapler;
- roulette;
- The line is metallic.
Installation of yendova
Endova plank scheme (Figure 4).
The production of an amplifying crate is the first step in installing the apple unit on the roof. The rice represents the layout of the crate. 2. It shows how the bars of the crate are woven together, how the tiles are laid perpendicularly, and how the bars laid in the coating’s flooring direction correspond to each other. A continuous crate is built for the installation of the lower bar (rice) at the location of the slope joint. 2. The crate’s layout (under the apple node).
Before attaching the yendova, it is necessary to lay an important element of the system – waterproofing. It is laid directly on a continuous crate. In Fig. 3 shows a layout of the waterproofing layer. Installation of the protective layer is carried out exactly on the axis of the junction. The technology includes the imposition of the following elements: a lining bitumen layer with an powder, a layer of bitumen-polymer material, an apple carpet of thin non-corroding metal. On top, as a rule, another bitumen layer is applied. The basis of protection (apple carpet) is attached using nails in a step of about 18-22 cm. Bitumen-polymer waterproofing is attached using a construction stapler (rice. 3 waterproofing scheme).
The lower level of the yendova is installed after the waterproofing has been laid. Installation starts at the roof’s skate and continues to the intersection of slopes. If required, strips should compound with one another at least 18 to 25 centimeters apart. Selection is carried out along the metal strip’s longitudinal edges. A strip of the Endova plank and the method of fastening it (rice.4 Endov bar) are depicted in Fig. 4.
The bar is fastened with screws or nails, spaced roughly 20 to 25 centimeters apart. A sealing tape or adhesive substance isolates the joints between the strips. Pre-drilling holes in the metal strip is advised to prevent damage to the sheet at the fastening locations. On top of the lower end of the plane, a metal tile is applied (VSTOK or with a gap, depending on the system chosen). Self-tapping screws are used for fastening after preliminary drilling. The mounting location needs to be at least 20 centimeters away from the joint’s axis.
A sealing gasket is fitted to the roof ridge at the yendov exit location in order to keep moisture from getting beneath the lower bar.
Installing the upper bar completes the installation process. The lower bar’s manufacturing process and its fastening technology are identical. There is at least 10 centimeters of overlap at the strip joints.
The junction is sealed at the junction. Because it serves as decoration, the upper bar’s color is coordinated with the main roofing.
Endova is a crucial component of the roof, and how well it is installed affects the overall roofing quality. You can mount it yourself, but you’ll need to plan everything out and do the work very carefully.
One crucial component of the roof structure is the endova for the metal tiles. These days, metal tiles are frequently used to roofs of many different kinds of buildings, and the roof itself is made up of a variety of joints that come together to create a beautiful design.
Selecting the appropriate end caps, also known as endova, for your metal tile roofing is essential for both practicality and visual appeal. These modest but crucial elements contribute significantly to your roof’s durability and weatherproofing in addition to improving its overall appearance. Endova helps stop water intrusion by properly sealing the edges of your metal tiles, extending the life of your roof and requiring less upkeep.
Take into account the unique profile and design of your metal tiles when choosing endova. The end caps should ensure a finished look that is both cohesive and appealing by matching the color and style of your roofing system. Additionally, as this will affect how well your endova withstand environmental elements like corrosion and UV exposure, make sure the endova you select are compatible with the type of metal used in your tiles.
Endova installation calls for careful attention to detail in order to provide a secure fit and top performance. End caps that are installed correctly offer a smooth transition from the roof’s surface to its edges, preserving the metal tile roofing’s structural integrity and visual appeal. Your roof will last for many years as long as possible if you install it according to manufacturer instructions and use high-quality materials to avoid problems like leaks and early wear.
Choosing the appropriate end cap, or endova, for metal tiles is crucial for guaranteeing both aesthetic appeal and long-term durability of your roof. This could be the main thesis statement for an article on "Endova for metal tiles" on the website "All about the roof." This part serves as a finishing touch for the edges of your roof and is essential for weatherproofing and preventing water intrusion. Homeowners can improve the overall quality and lifespan of their metal tile roofing by making informed decisions by being aware of the various endova types that are available, how to install them, and how much maintenance they require."