How to cover the broken roof with a metal tile

Imagine your day being ruined by a leaky roof when you wake up to the sound of rain. Whether the damage is caused by age, weather, or unplanned events, replacing your roof as soon as possible is essential. Covering it with metal tiles is a common and long-lasting solution that provides resilience and visual appeal.

Because metal tiles are designed to endure severe weather, they are perfect for shielding your house from snow, rain, and even hail. They are available in a variety of colors and styles, so you can complement or contrast the architectural style of your house. In addition to being aesthetically pleasing, metal tiles are strong and lightweight, which lessens the strain on the structure of your house while offering long-lasting protection.

There are a few essential steps involved in using metal tiles to repair a damaged roof. Prior to installing the new tiles, evaluate the extent of the damage and make sure the roof is structurally sound. To avoid problems later, any repairs or reinforcements that are required should be finished in advance.

Next, take precise measurements of the roof to ascertain how many metal tiles are required. This step guarantees that you buy the appropriate quantity, preventing delays and extra expenses. A flawless installation depends on accurate measurement, which guarantees that every edge and corner is sufficiently covered.

The weatherproof underlayment, which serves as a barrier against moisture and improves the insulation of the roof, is first installed. After that, the metal tiles are carefully affixed, working their way up from the bottom. Your home is protected from the elements by a sturdy barrier made possible by the interlocking nature of each tile.

Compared to conventional roofing materials, metal tiles require less maintenance after installation. To keep them in perfect condition, routine cleaning and inspections are usually enough, providing long-term cost savings on repairs as well as peace of mind.

For homeowners looking for longevity, visual appeal, and peace of mind against erratic weather, covering your damaged roof with metal tiles is the best option. Metal tiles can turn your roof into a dependable shield that raises the curb appeal and value of your house for many years to come with the right installation and maintenance.

Steps to Cover a Broken Roof with Metal Tiles Tips for Successful Installation
Clean the damaged area thoroughly to remove debris and old roofing materials. Use appropriate safety gear such as gloves and sturdy footwear.
Inspect the roof for underlying issues like leaks or structural damage. Ensure all tiles are properly aligned and interlocked for a secure fit.
Measure and cut metal tiles to fit the damaged area precisely. Apply a weather-resistant underlayment before installing the metal tiles.
Start from the bottom and work your way up, overlapping each row of tiles. Double-check the installation for any gaps or loose tiles.
Contents
  1. How to cover the roof with a metal tile – the order and features of the installation with your own hands
  2. Characteristics of metal tiles
  3. Composition and device of metal roofing
  4. Stages and procedure for installing a roof of metal tiles with your own hands
  5. How to cover a roof on various types of roof
  6. Step -by -step instructions for the installation of metal tiles using a special technology from A to Z
  7. Installation of the crate
  8. Calculation of metal tiles
  9. Metal tape roof: waterproofing and vapor barrier
  10. Necessary tools and equipment
  11. Fixing and laying metal tiles – step by step
  12. Installation of metal tiles – step -by -step instructions
  13. Continuous elements
  14. Tips for masters
  15. How to cover the roof with a metal tile with your own hands and prevent mistakes
  16. What is a metal tile
  17. A brief overview of the advantages and disadvantages of metal tiles
  18. How to choose a metal tile
  19. Features of the device of the rafter system for metal tiles
  20. How to cover a gable roof
  21. The procedure for mounting sheets
  22. Features of installation of metal tiles on a broken roof
  23. Mansard windows
  24. How to handle metal tiles
  25. How to cut a metal tile
  26. How to cover the roof with a metal tile: installation technology
  27. Calculation of the number of necessary materials
  28. Tasks and roofing pie for metal tiles
  29. Tools
  30. Roof covering technology with metal tiles
  31. Video on the topic
  32. Filling between four sheets of metal tiles. UNNIKMA.
  33. Roof installation. Browned attic. Metal tile
  34. Dismantling and installation of the roof (slate – metal tile). No. 1 Armstroy Armstroyka ru
  35. Pan roof covering with a metal tile
  36. Roof Mistakes. Watch be sure.

How to cover the roof with a metal tile – the order and features of the installation with your own hands

Among the contemporary roofing materials, metal tiles combine a stunning aesthetic, reasonable price, and several significant technological benefits. Installing it is not too difficult; if you are familiar with how to equip a roof’s flooring with metal tiles, you can complete this task with your hands.

Of course, there’s always the alternative of saving yourself the trouble and delegating all the work to experts. But since this option will be far more expensive, not everyone will prefer a comparable substitute.

Therefore, we should first familiarize ourselves with the technology and features of this process if, after weighing all the advantages and disadvantages, we determine that a roof with a metal tile and a roof with a metal cutter is the better option.

Characteristics of metal tiles

One kind of metal-profile product that has the wavy surface of tiles is called metal-tile material. Galvanized steel is used to make its sheets, which are subsequently coated in polymer compounds to give the finished products a stunning appearance and resistance to harmful outside influences.

The roof’s metal coating offers several noteworthy benefits, such as the following:

  • High strength, resistance to mechanical and wind loads.
  • Light weight of products and ease of installation. It is not difficult to cover the roof with a metal tile, it does not require too much physical effort or the development of too complex skills.
  • Aesthetic appearance.
  • High resistance to corrosion processes.
  • A long service life of several decades.
  • Affordable price.

If you have studied the metal tile roofing process and technology thoroughly, you can save a lot of money by doing this work yourself. It will be helpful to know that installing a roof will cost more than one-third of the total cost.

Composition and device of metal roofing

Installing a multilayer structure with the following components is the process of laying metal tiles on the roof:

  • A vapor barrier, represented by a film that passes steam, but blocking condensate and water, so as not to let the insulation get wet. The laying of a vapor barrier film is carried out on the lower surface of the rafters, after which it is fixed through a construction stapler.
  • Rafters, the reliability of the roofing as a whole largely depends on the quantity and strength of which largely. The places of attachment of the rafters and the distance between them should accurately calculate, and then carefully install them.
  • A layer of insulation material that is attached between the rafters of the structure. For this reason, the width of the insulation should be taken into account when arranging a rafter frame.
  • Waterproofing layer, the material of which is laid on top of the rafters and protects wooden frame structures from moisture or condensate.
  • Colelite serving for the subsequent laying of metal tiles. Its function consists in uniform distribution of roofing weight.
  • Metal tile, laid on top of the dozen structure, followed by fixation through self -cutting screws.

It should be mentioned that there are two types of metal roofing: warm and cold. There are no layers of thermal insulation or vapor barrier on the cold roof. Of course, a roof like that will be much less expensive, but the attic and upper floor will also pose a lot of challenges. Consequently, it is preferable to use a warm variant of roofing when deciding how to cover the attic roof with metal tiles.

Stages and procedure for installing a roof of metal tiles with your own hands

A thorough understanding of the characteristics and guidelines governing installation work is essential to guaranteeing the dependability and extended lifespan of a metal roof. These guidelines must then be followed throughout the installation process.

If you thoroughly examine the issue of how to correctly cover the roof with a metal tile, the following are the step-by-step instructions for doing this work:

  1. Arrangement of rafter structures. The rafter frame can be metallic, but more often made of wood of coniferous trees, which is impregnated with an antiseptic and antipyrene. Initially, the Mauerlat grocery beam is installed, which is fixed by means of anchor bolts or metal studs mounted in concrete. Next, the attachment of a beam fixing the Mauerlat is installed at a distance of 1-1.2 meters from each other. After that, vertical racks are mounted in the middle of each of the puffs, with intervals of 1-1.2 meters, using temporary support for them. Then, on top of the racks, a skate beam is laid, on which rafters are further attached. The distance between the rafters can be different, usually from 60 to 120 centimeters, and depends on the severity of the roof, the thickness of the rafters themselves and the width of the insulation.
  2. Covering the rafters with a layer of waterproofing material, which is laid horizontally, with some sagging and without stretching, in order to avoid a breakthrough under the weight of water. The mounting of the waterproofing material is carried out directly to the rafters, through brackets or stainless nails with a wide hat.
  3. Installation of the crate, for the construction of which wooden rails are used about 3 centimeters thick, or sheets of moisture -resistant plywood. The gaps between the chatter elements can also vary depending on the weight and the steepness of the roof – for more gentle roofs, this distance should be less, and the crate itself is stronger.
  4. Installation of the cornice of the bar, for the fixing of which in the area of ​​the cornice of the roof to the ends of the rafters, the frontal board is mounted. The cornice bar is laid on top on the frontal board and is fixed by means of galvanized nails.
  5. Installation of a vapor barrier layer, which is then covered with a layer of thermal insulation. The vapor barrier is laid on the lower surface of the rafter legs, and the subsequent laying of the insulation is carried out between the elements of the rafters. Mineral wool, glass wool, polyurethane foam, foam, etc. can be used as thermal insulation material. D.
  6. Installation of additional elements of the ends, the fastening of which is carried out to the design of the crate.
  7. Flooring. This process also includes several stages. Firstly, if necessary, cutting sheets of metal tiles is carried out to comply with the covered surface. Then the lower row of sheets is laid out, over 10-20 centimeters. Next, subsequent rows are laid. It is advisable to treat the butt areas between the sheets with a sealant to prevent water flow. All sheets of metal tiles are fixed by means of galvanized self -cutting screws with a press -shaped.
  8. After completion of work on laying the main part of the roofing structure, ridge, end and other additional elements are installed, as well as the installation of the germinum roof system.

How to cover a roof on various types of roof

Despite the fact that metal coating installation generally shares many similarities, depending on the type of roof, there may be subtle variations in this process for particular roof types. When installing metal tiles on a four-sloped roof, for instance, or thinking about how to cover a broken roof with metal tiles, it’s crucial to consider a few more factors before beginning work. If not, one may run into unexpected circumstances and serious issues during the installation and ongoing operation.

Classical and the simplest options for the roof device are single -slot and gable structures. When looking for a solution, how to cover a gable roof with a metal tile with your own hands, it is enough to simply adhere to a general work plan stated above. The answer to the question of how to cover a single -sloping roof with a metal tile is even more simple. In this case, there is no need to equip the horse and yendovs, and all that is required is directly the installation of the roof itself. It is only necessary to remember that plain roofs can be with or without attic, and like other roofs, they can be equipped either in a warm or cold version.

A slightly greater difficulty is the arrangement of multifaceted roofs, as well as roofs with a complex structure. This includes, for example, the coating of the roof of the broken roof with a metal tile. Brown roofs can have a different number of racks continuing, increasing the interior and comfort of the living room as a whole. The process of arranging a broken roof from a metal tile with your own hands is generally the same as ordinary roofs, however, it is additionally required to close the butt areas that can pass water during sedimentation. The waterproofing in this case is laid along the slopes, and in the same way it is possible to install insulation material and crate.

When arranging intricate roofs with four or more slopes, it is advised to use specific steel components to support the rafters and keep their location fixed. For the most loaded skating beams, it is also preferable to use robust steel supports. It should be highlighted that the absence of pediments, which are installed in the end sections of gable roofs, distinguishes four-sloping roofs from gable roofs. Although this type of design requires more work to install, it is stronger and more dependable.

Lastly, it should be mentioned that building a roof yourself may influence the use of unique designs and solutions by builders; the best option will always depend on the specifics of the job.

How to cover the roof with a metal tile: we used our hands to cut a gable and a four-sized roof. Here are step-by-step instructions on how to cover it correctly.

How to cover the roof with a metal tile: we used our hands to cut a gable and a four-sized roof. Here are step-by-step instructions on how to cover it correctly.

We’ll go over step-by-step instructions on how to use metal tiles to upgrade and fix your roof in our guide, "How to Cover a Broken Roof with Metal Tiles." Metal tiles are strong and visually pleasing, regardless of whether weather-related or wear-and-tear damage has affected your roof. We’ll guide you through the preparatory procedures, like evaluating the damage and tidying the area. After that, we’ll walk you through installation procedures to guarantee a stable and durable repair. This article attempts to equip homeowners with the knowledge and skills necessary to confidently take on roof repairs, improving curb appeal and functionality.

Step -by -step instructions for the installation of metal tiles using a special technology from A to Z

Metal tiles are a type of roofing material that resembles polymer-coated profiled steel sheets. used as a roof covering for roof angles greater than 14 degrees.

Although it appears to be a traditional ceramic tile from the outside, it is more dependable and simpler to install. In this piece, we looked at the relative merits of metal tiles and soft roofs.

Durable material resistant to high temperatures and other unfavorable weather conditions. Its primary flaw is that it has poor soundproofing qualities, but this can be overcome with the right effort.

This article will walk you through the process of creating a metal tile roof from A to Z using only your hands. Read this article if you need help selecting a metal tile.

Installation of the crate

Since this tile will be fastened to the crate, extra care should be taken during this stage of the project. Additionally, this design allows for natural ventilation of the roof’s interior.

  1. The metal tile crate is made of Wooden timber. The mutual arrangement of the boards can be continuous and shed.
  2. Most often used Distributed structures, At the same time, the distance between the boards (the step of the crate) is strictly tied to the distance between the lower cavities of the tile waves, since in these places the material has the greatest strength.
  3. Distance between the first two bars from the side of the slope should be approximately 70 centimeters less than the installed step.
  4. The minimum thickness and width of the crate boards make up 25 and 100 mm respectively.
  5. The width of the board for the counterparty can be half as much. The first board from the edge of the roof should be thicker than all others by 15-20 mm.

Following the completion of the waterproofing layer installation, the structure is installed. Using self-tapping screws, the main crate is fastened to the counterparty, which is connected to the rafter frame. Extra support boards are positioned beneath the roof skate.

Calculation of metal tiles

Count Use this formula (or the online calculator) to determine how much material is needed to construct the roof:

  • Calculated square each slope.
  • The effective size of the tile sheet is calculated, for this From its full area, the area used in the hollow is deducted.
  • The number of rows of tiles on the slope is calculated. For this The working length of the slope must be divided into sheet width.
  • The number of sheets in the row is calculated.
  • The number of rows and sheets in the row move.

You must account for the value overlap, which can range from 15 to 20 centimeters, when figuring out how many sheets there are in the row.

It is preferable to round all values in the larger direction to ensure that there is no shortage of material.

Metal tape roof: waterproofing and vapor barrier

Prior to beginning the manual installation of metal tiles, you should take care of the insulation roofing pie. Vapor barrier and waterproofing layers provide interior spaces with protection from liquid.

The waterproofing keeps environmental moisture out of the roof pie’s interior and is situated between the rafters and the counterparty. The most widely used moisture-resistant materials are reinforced films and polyethylene. They are pulled with a slight sagging over the whole slope. Making sure that the waterproofing and thermal insulation do not cross is crucial.

A protective layer of moisture known as the vapor barrier forms inside the rooms. As the lowest layer of the roof pie, it is protected from condensation by being positioned beneath the rafters and attached to them with thermal insulation.

A metal attic roof needs to have a high-quality vapor barrier; however, vapor barriers do not need to be installed on cold roofs without insulation.

Necessary tools and equipment

The first step in installing a metal roof tile is to get the required tools ready. The following supplies are required for the installation of a metal tile roof:

  • Scurgery.
  • Rail.
  • Scissors for metal or other metal cutting devices, for example, cutting scissors, a disk saw, etc. D.
  • Construction Stapler.
  • Roulette and marker.
  • The components of the roof and roofing cake: tile sheets, screws, hydro-, steam and heat-insulating materials, crate bars and rafters.

Fixing and laying metal tiles – step by step

How can you use your hands to manually apply a metal tile to the roof? Self-tapping screws are used to secure the metal tile to the crate, and ethylene-protopylene rubber is used to ensure that the fasteners are waterproof.

Galvanized screws with a press shame are used when mounting a tile with a hidden mount.

Self-tapping screws must be twisted with the greatest possible force.

Insufficient fastening force will allow moisture to seep under the hat and lead to corrosion. Overtightening the screws will cause the laying to become deformed and will violate the tightness of the screw.

  1. Before covering the roof with a metal tile, you should make sure of the symmetry and reliability of the crate.
  2. Self -tapping screws They are screwed in the places of the bottom of the tile, They should enter strictly perpendicular to the plane of the label boards.
  3. When connecting two overlaps fastening is carried out in the rise of the wave using shortened screws.
  4. The installation of tiles begins with the lower left corner of the slope, subsequent sheets are laid on top previous.
  5. Self -tapping screws They are screwed into each wave of tiles around the perimeter of the slope and in a checkerboard pattern In the internal areas. If a screwdriver is used for this, then you need to minimize its rotational effect on the material.

Do-it-yourself installation and instructions for metal tile

Now that you understand how to install a metal tile correctly, we advise you to become acquainted with the most crucial item: installation instructions for metal tiles.

Installation of metal tiles – step -by -step instructions

How can you use your hands to correctly cover the roof with a metal tile? Setting up the rafter system is the first step.

Every other component of the roof will be fixed on it. The framework is made of wooden beams, which are larger than the crate’s bars in dimension.

The following are the rafters’ most crucial components:

  • Mauerlat. This is the design point.
  • Rafter legs. They keep a crate and rely on Mauerlat.
  • Racks. Enhance the support of the rafter legs.

The so-called Shinok is used to secure the rafters to the wall. These metal strips are fastened to two structures using self-tapping screws or nails.

Following are installed The three main layers of insulation are waterproofing, insulation, and steam. The membrane or waterproofing film is adhered to the rafter system and secured with a stapler. Using cords drawn across in the lower plane of the rafters, thermal insulation is installed in cells made up of the intersections of the rafter beams and fixed in place.

You can begin installing a crate once the protective structures have been installed. We will then install the roofing on top of the crate. She put self-tapping screws to these designs after superimposing them on top of the rafters and waterproofing layer.

How to install metal tiles by hand:

  1. The cornice bar is attached to the frontal board, Providing roof protection From the exposure of the wind.
  2. When performing work, the need to ensure good natural ventilation of the space is always taken into account. To do this, you need to leave the gaps between all layers of roofing pie. The basis of natural ventilation is the possibility of free circulation of air under the skate of the roof.
  3. The last step is Installation of metal tiles. It must be borne in mind that the sheets should protrude beyond the edges of the crate of 5 centimeters and level horizontally along the cornice line.
  4. Skate bar attached to Additional two boards, which are installed at the junctions of two slopes during the installation of the crate. Such measures are necessary to ensure additional stability of an important constructive element to negative influences.

Plan for installing metal tiles

Extra care is needed when laying metal tiles around the chimney. First of all, it is required prior to Set away. Second, the boards that are fastened to the crate must be installed around it. Third, there is a 15-centimeter cut on all sides of the chimney for the tile.

Continuous elements

A complete list of products that may be required when installing a metal tile roof can be found here, in addition to the cornice and skating strips mentioned above:

  • Snow holders. They loosen snow masses converging from the roof, making their fall relatively safe for the buildings of the building and for humans.
  • Blood planks. These products framed the joints of the tiles with all important structures, such as furnace pipes and ventilation pipes.
  • Corners and yendovs. They protect all the corner structures of the roof.
  • Expanse. Used to redirect the flows of rain and melt water.
  • Ovka.

Tips for masters

  • Distance between the beams of the rafter frame should be no more 60-90 centimeters, Otherwise, the design of the roof can sink.
  • When performing work, you need to put on shoes on soft soles and move along the tile, advancing in its lower deflection. This will prevent pouring material.
  • The lack of contacts between the protective layers is important not only to ensure ventilation, but to prevent them mechanical damage With friction.
  • To ensure additional ventilation, you can equip auditory windows In the attic.
  • For a flat installation of all oblong additional elements You need to stretch the thread and consolidate it between the two already installed structures.

This is the appearance of the technology used to install metal roof tiles. This material has a roughly 50-year service life, but only proper installation will allow the operation to be completed without the need for repairs.

Accurately calculating the material consumption necessitates knowledge of the coating’s size as well as all other dimensions and proportions. An order of magnitude reduction in the operational period can occur from even small deviations from the required indicators.

Installation of metal tiles: a comprehensive guide on how to assemble a metal roof using your hands. The proper application of roof coating, accurate calculation and installation of roofing on crates, as well as the use of tried-and-true technology for rafter and other element installation, will all be covered in this article.

How to cover the roof with a metal tile with your own hands and prevent mistakes

Metal tiles are a relatively new addition to the building materials market. Still, she became extremely well-liked amongst private developers right away. Not surprisingly, either. This material is unique not only in its excellent functioning qualities but also in its easy installation. Let’s talk about how to cover a roof with a metal tile using your hands in this article. Let’s first examine the benefits and drawbacks of this material.

What is a metal tile

Steel sheets that have been galvanized and coated in a polymer protective composition make up the metal tile. This material’s distinctive form is what gives it its name. The factory stamps the sheets so that, from a distance, they resemble prestigious clay roofing tiles and well-known roads. As a result, the roof presents itself quite well. The typical sheet is 110 by 118 cm in size.

A brief overview of the advantages and disadvantages of metal tiles

We’ll look at how to correctly cover the roof with a metal tile in more detail below. Let’s now examine the differences in this material’s benefits and drawbacks. Among its benefits are:

  • Aesthetic attractiveness. Metal tile sheets are usually stained in juicy bright colors. Therefore, the roof covered with them looks beautiful and modern.
  • Durability. Since the sheets are protected from corrosion with two protective layers – zinc and polymer, such a roof can last more than one decade.
  • Simplicity of installation. The question of how to cover the roof with a metal tile is completely simple. Any home master will be able to install sheets. Installation can be made in a short time.
  • Low cost. Compared to other roofing materials, with the exception of a profiled sheet, the metal tile is very cheap.

The drawbacks are essentially nonexistent. Rust may show up on the sheets’ surface if there are any scratches. This is just one drawback. Furthermore, metal is a fairly "noisy" material for tiles. In the absence of insulation, the sound of raindrops hitting the roof during a downpour can be clearly heard throughout the house’s rooms.

How to choose a metal tile

Let’s examine how to install a metal tile covering on the roof of the house to extend its lifespan. First and foremost, you should consider the kind and thickness of the polymer coating when making your selection. A matte or glossy polyester covering with a thickness ranging from 25 to 35 μm can be applied to the metal tile. This type of coating’s primary benefits are its low cost and resilience to harmful environmental elements. Matte metal imitates natural materials more realistically than glossy metal, giving it a slightly more beautiful appearance. The poor resistance of polyester coating to mechanical forces is a drawback.

Additionally, plastisol-coated sheets are made. This substance is derived from a well-known polyvinyl chloride. At 100–200 microns, this coating is the thickest of all. The embossed surface is what makes it unique. One of this coating’s advantages is its high level of wear resistance. It is very difficult to scratch a sheet protected by this kind of polymer. Its poor resistance to high temperatures is a drawback. You should not buy material with this kind of coating, for instance, if you are wondering how to cover the roof of a house built in a hot climate with metal tiles.

Pural, a polyurethane-based film, is another kind of polymer protection for metal tiles. Typically, the layer has a thickness of 5 microns. In addition to being less scratched than polyester, this material can withstand extremely high temperatures, unlike plastisol. Furthermore, it doesn’t burn at all in the sun. Its poor resistance to plastic deformations is a drawback. That is to say, you must carefully bend such sheets when editing.

The final type of coating is called PVDF, which is an acrylic and polyvinyl fluoride mixture. This shield typically has a thickness of 27 microns. The shiny, "metallic" color of the sheets covered with it makes them stand out. The strongest coating available is this one. Maximum resistance to UV rays and the appearance of scratches are two more benefits. The PVDF opening’s capacity to self-purify while it rains is a highly intriguing feature. In an environment that is hostile, experts advise using these kinds of sheets. For instance, to cover the rooftops of coastal homes.

Features of the device of the rafter system for metal tiles

At the same time, you should determine the proper design for the rafter system before attempting to cover the roof independently with metal tiles. Standard sheet bases are installed in 60-centimeter steps. The components of the crate can be used continuously or arranged to match the pitch of the sheet wave. Every component of the rafter system needs to be coated with an antiseptic material. They also receive treatment with a tool that strengthens the tree’s resistance to fire.

How to cover a gable roof

Let’s start by discussing how to cover a gable roof with metal tiles. This kind of roof is among the most straightforward in terms of construction. A roof with two slopes like this is positioned at an angle to the horizon. It should be at least 11 degrees for metal tiles.

A waterproofing layer ought to be installed when constructing a roof for any kind of roofing material. There is some sag where the film is fastened to the rafters. There is a 10-cm overlap between the horizontal membrane stripes. Moreover, a crate is loaded onto the rafters above the film. Use narrow boards (100 x 30 mm) under metal tiles.

Since there are two slopes to the roof, why not cover it with a metal tile with your hands? The crate is fitted with sheets using unique self-tapping roofing screws (4.8 x 28 mm). There should be a gasket from the EPDM-razin on each fastener. Specifically, screws whose hats match the color of the sheets must be purchased. Using a screwdriver, tighten the screws to firmly press the material against the crate, being careful not to overpress the gasket or distort the metal.

On a gable roof, begin installation from the cornice board and the end. Elements can be installed both left to right and vice versa. The cornice is used as the guide for alignment, not the end.

In the locations where the crate is located, fastening is done through one transverse wave along the longitudinal wave. The capillary groove is on the left side of each sheet. It is covered with the following sheet during installation. Self-tapping screws are used to secure the overlap in two locations: beneath the wave and on top of it. The sheet’s lower edge should extend 40 cm down the cornice.

The procedure for mounting sheets

How should a metal tile be applied to the roof, or more accurately, how should the skin be treated? The installation process involves several steps.

  1. The sheet is lifted to the roof and attached at the cornice. While temporarily fix it in the skate.
  2. Next, the sheet is slightly lifted and the second is laid under it.
  3. Connect them, screw the screws along the overlap from the bottom up.
  4. After installing two or three sheets, temporary self-tapping screws at the skate can be twisted.
  5. The resulting block of sheets is thoroughly aligned according to the cornice.
  6. In the event that the length of one sheet is not enough to cover the entire slope, the second row is mounted. The width of the horizontal overlap should be at least 10 cm. Install two sheets of the lower row, then attach one upper. After that, mount the third sheet of the first row and the second, then – the fourth of the first and third second and t. D. Fasten the sheets over each other without running.
  7. With the help of galvanized self-tapping screws on the upper wave, the values ​​are attached (step 20-30 cm).
  8. A skate element is attached to the crate (through one vertical wave). Between the bar and the skate, a special seal is preliminarily laid.

Features of installation of metal tiles on a broken roof

Another common roof type is the brown gable roof. Usually, it’s set up for when they wish to outfit a living attic beneath it. Let’s now examine how to use a metal tile to cover the damaged roof.

In this instance, the sheets are installed in the same sequence. At the location of the roof fracture, a unique exterior corner is installed. It is installed in the same manner as the skate bar—through a single vertical wave. Attached beneath the upper sheet and above the lower is the corner element. The seal is placed between the upper sheet and the corner.

Mansard windows

You now know how to use a metal tile to cover the roof with your hands. As you can see, covering the crate with sheets is a simple process. Performing this task with different types of roof structural components is a little more challenging. With an apron of attic windows, for instance. In this instance, the sheet may be approaching the beginning of both the wave’s successful and unsuccessful phases. Generally speaking, though, the window can be moved up or down. Thus, simply try different approaches until you achieve the densest possible docking of the window’s lower apron using roofing material sheets.

How to handle metal tiles

As a result, we learned how to sheathe a gable and cover the attic roof with a metal tile. Let’s now examine how to manage the roofing material’s sheets. The metal tile that was brought should be piled up because the sheets will be arranged in rows. Wearing soft slippers while walking on the roof during installation will prevent damage to the polymer coating.

How to cut a metal tile

The issue of how to manually cover the roof with a metal tile comes down to the guidelines for both installing and cutting sheets. A grinder should not be used for cutting as this could damage the polymer coating. Electric scissors or metal-cutting scissors can be used to cut the sheets. Cutting should only be done with goggles and mittens on.

Sheets of metal tile installation need to be done very precisely. This guideline applies when cutting as well as when fastening them to the roof. Your roof will last you a long time if you take care not to harm the material’s polymer and zinc coating.

How do you properly cover the roof with a metal tile using your hands? It is simple to carry out. The ease of installation of this roofing material is precisely one of its main advantages. In the lining process, adherence to established technology and careful handling of sheets coated in a thin layer of polymer are crucial.

How to cover the roof with a metal tile: installation technology

Metal roofing tiles are a stunning and robust material that, when installed properly, will guarantee their longevity and resistance to weather-related events.

Calculation of the number of necessary materials

The metal tile on the roof has to be calculated before any work can start. Every component has a fully functional area. The one that truly covers the roof is full-size, useful, and accounts for overlap.

Every manufacturer creates roofing materials with varying overlap sizes:

  • 10 cm, 12 cm, etc. D. vertically
  • 6 cm, 8 cm, 9 cm – horizontally

Only the useful portion of the sheet is considered during the computations. The wavelength of 35 cm determines its length; the quantity of waves may vary. For various manufacturers, the sheet’s useful length varies from 35 cm to 3.5 m. We calculate the horizontal rows based on this indicator.

Additionally, the sheets’ useful width varies, ranging from 1 m 5 cm to 1 m 10 cm and beyond. The number of vertical rows is based on the width of the sheet.

The horizontal rows are computed by simply dividing the slope’s width into a practical width of one sheet, provided that the roof slope is properly rectangular in shape. A rounding is done on the resultant number.

The vertical rows are computed by rounding up and dividing the slope’s height by 35 cm. When the angle is as small as 14 degrees, two waves are required to overwhelm.

Metal tile calculations on the roof using the software

Additional roof components, the quantity of which needs to be determined:

  • Elements covering the horse and ribs; their total length is measured, another 10% of the overlap is added to it
  • Elements that form the inner angle at the place of the slope of the slopes – the yendovs, external and internal
  • The cornice bar is desirable, but not an obligatory element covering the ends of the rafters; Its length is equal to the perimeter of the cornices
  • The end bar – closing the ends of the crate, protects the sheets of tiles from torn with the wind; Its length is equal to the total length of the ends
  • Film for waterproofing – the amount of material is equal to the area of ​​the roof plus 15 cm for overlap of each row
  • Porous strip for sealing in the places of clearance between the skate, end
  • Bars equal to the rafters in length, boards for the crate; Each slope closes with them with 35 cm pitch

Tasks and roofing pie for metal tiles

Layers of materials serving different purposes are installed on the roof device:

  • The heat -insulating layer protects the rafter system from condensate formation
  • Vapor barrier protects hydrophobic heat -insulating materials from moisture
  • Waterproofing material
  • Metal tank and crate
  • Metal tile

Metal tile roofing pies

Tools

  • Screwdriver and hexagonal nozzle for him
  • Curtain scissors electric or nibbler
  • Roofing scissors manual
  • Kiyanka
  • Jigsaw, hammer, hacksaw (for the installation of rafters and crate)
  • Level, plumb, level

Tools for installing metal tiles

Screwdrivers are used to mount the cornice bar for metal tiles, which is likewise driven by electric wizards. Here is a more detailed description of the installation procedure for this element.

Roof covering technology with metal tiles

A 5×15 cm crate’s rafters are arranged in steps of 60–90 cm.

Below is the first board, which is 1-2 cm thicker than the others. It is nailed to rafters with 7-8 cm nails oriented vertically.

The following boards have a pedimental overhang and are nailed with a 35 cm pitch, which is equal to the wavelength on the sheet.

Step of the metal tile crate

Internal cornice bar and yendov

First, adjust the internal yendovs beginning below.

The entire lower edge is sealed with a porous sealing strip.

The cornice bar is fixed before any tile laying begins. It is positioned along the slope’s lower cut and fastened to the crate using self-leading screws. Drill cornices with a 5–10 cm overlap.

Installing metal roofing tiles

The first sheet is fastened to the bottom right of the roof of the roof with a metal tile.

A board that protrudes 4-5 centimeters from the ends of the rafters and is nailed there is responsible for the first row’s flawlessly even edge. It is later disassembled.

Using a screwdriver, the sheet is aligned along the pediment and cornice overhang and fastened with a self-tapping screw in the first upper wave on the right.

The best fasteners are rubber puck-equipped 35 mm roof screws.

Using a self-tapping screw, the second sheet is first placed over the first and secured at the overlapped area. In order to guarantee that the roof panel has the proper geometric shape, the third sheet is then placed in the lower row or the first in the second.

The installation of the metal tile profile

The installation of the metal tile skate

After the metal tile sheets are installed, the horse is fixed on top of a sealing strip that has been glued along the ridge.

Skating screws are used to attach skate elements in accordance with the ribs.

The installation of the metal tile end bar

The end strips are fastened to a pre-nailed end bar that is fastened from the sides and from above. The self-tapping screw penetrates the top of the metal tile wave.

Make a 10-cm overlap in order to build up a wind bar.

The placement of the metal tile valleys

Using the Klyammers, Lower Endova is secured to the crate.

Self-tapping screws for upper roofing that are spaced 20–30 cm apart along the upper portion of the wave without compromising the lower’s structural integrity.

Metal installation plan of metal

Snow retainers are positioned in two rows if the slope is very long. An extra beam is positioned for them during the crate’s device, 12 cm away from the main board. The snow retainer is fastened to the beam using an anchor that passes through a rubber gasket that seals the metal tile sheet.

The auditory window’s design

The protruding auditory window is constructed in a manner akin to the slope joints: lower yendovs are laid first, followed by tiles, and finally upper values. The self-expanding tape is sealed by the knot.

Scheme for designing auditory windows

Underneath the rafters is a heat-insulating layer that covers the whole length of the room with vapor barrier film.

Film canvases are pulled from below, with a 10- to 15-cm overlap made between the rows and taped in place. Use a building stapler to secure the film to the rafters.

Metal roofing tiles are lightweight and non-flammable, and because of their rigidity, they can be installed on crates with a sizable step. You can select the optimal solution based on the load, the variation in metal thickness, and the cost. Following the instructions and installing the roof in the correct order is essential to its longevity.

How can a metal tile be applied to the roof? With the right calculation formula and work methods, you can install lovely, long-lasting, lightweight, and reasonably priced

A strong and stylish way to shield your house from the weather is to cover a damaged roof with metal tiles. Metal tiles are robust and lightweight, offering exceptional weather resistance and long-term durability.

It is essential to prepare before repairing a damaged roof. Assess the extent of the damage and make sure the soundness of the underlying structure first. Prior to installing the metal tiles, repair any damaged sheathing and address any structural problems.

When installing metal tiles, you must carefully arrange them, working your way up from the eaves. To guarantee a watertight seal, use the proper fasteners and adhere to the manufacturer’s recommendations regarding overlap and spacing. When placed correctly, metal tiles offer durable protection against wind, rain, and snow.

Check the roof after installation for wear and damage on a regular basis. The lifespan of the roof may be impacted by water buildup, so maintain gutters and make sure proper drainage is in place. A metal tile roof can elegantly protect your house for many years with proper upkeep.

Video on the topic

Filling between four sheets of metal tiles. UNNIKMA.

Roof installation. Browned attic. Metal tile

Dismantling and installation of the roof (slate – metal tile). No. 1 Armstroy Armstroyka ru

Pan roof covering with a metal tile

Roof Mistakes. Watch be sure.

What do you think, which element is the most important for a reliable and durable roof?
Share to friends
Alexandra Fedorova

Journalist, author of articles on construction and repair. I will help you understand the complex issues related to the choice and installation of the roof.

Rate author
Innfes.com
Add a comment