How to make a weather vane with a propeller with your own hands

Are you looking for a fun do-it-yourself project or are you fascinated by weather phenomena? Combining a little science with useful craftsmanship is a great way to create a weather vane using a propeller. A weather vane, sometimes referred to as a wind vane, is a tool used to predict wind direction. It’s a lovely accent to any rooftop, providing both visual appeal and practical utility.

It is actually very easy to make your own weather vane with a propeller. It uses simple supplies and easy-to-follow instructions that anyone can do. This project is a fantastic way to exercise your creativity while learning about wind direction and its significance in weather forecasting, regardless of your level of experience with do-it-yourself projects.

First, assemble the necessary supplies. To allow the propeller to rotate freely with the wind, you’ll need things like a mounting rod or axis, a sturdy base (usually made of wood or metal for stability), and a lightweight propeller (which can be made or purchased from materials like cardboard or lightweight metal). You can easily find these materials online or at hardware stores, and some of them may even be laying around your house.

As soon as your supplies are prepared, you start building by putting the base together. This entails fastening the mounting rod or axis firmly to a solid platform. Select strong, weather-resistant materials for the platform so that it can endure wind and other environmental factors. The foundation for your weather vane’s rotation and wind direction indication is laid by this step.

The propeller should then be fastened to the mounting rod or axis. Make sure the propeller can spin freely in response to the wind and is balanced. For an accurate indication of wind direction, this is essential. You can add decorative accents or personal touches to personalize and personalize the propeller design to make your weather vane one-of-a-kind.

After assembling your weather vane with a propeller, the last step is installation. Your weather vane should be placed in a visible spot where it can catch the wind unhindered, such as your garden or rooftop. In order to keep it from being blown away during severe gusts, secure it firmly. Now take a seat back and watch as your handcrafted weather vane subtly indicates the wind’s direction, enhancing the attractiveness and usefulness of your outdoor area.

"A useful and entertaining way to track wind direction is to build a weather vane at home with a propeller. Beginners can complete this DIY project because it only needs simple tools, metal rods, and wood. Anyone can build a useful weather vane that enhances the aesthetics of their rooftop and offers insightful weather information by following simple instructions and utilizing everyday objects in novel ways."

Types of weathercocks

Wollers can have unique shapes, external resemblances to animal or aircraft models, etc. D. These are design features; the functional parameters of the products are unaffected by them. The primary distinctions between them are in the manufacturing materials.

What is useful in this situation?

The primary consideration when selecting a material should be the intended use of the flood and the installation location. If it is going to be installed on a roof, you should pick materials that are lovely, long-lasting, and resistant to air sediments. Every mobile component needs to be completed with a wide safety margin because nobody wants to climb to the roof every month to fix their gadget.

Prices for various types of weathercocks


Production of a copper flood

The weather vine measures 18 by 29 centimeters and is made of brass and copper. Large weather vanes are useless because they merely make production more difficult and decrease reliability. Regarding the design species, there are strict limitations on the sizes of the components that are mounted on the roof skate. And the final one. Remember that there are additional holes in the roof that are not helpful to her, and that the weather vapor will need to be fixed.

You can use old objects and improvised materials left over from other projects to make a weather vine. In this instance, an oil pump plunger, an extra old brass braid, a copper rod with a diameter of 6 mm, and a piece of fluoroplast are utilized. Fluoroplast is used as a bearing because it has a high wear resistance, sufficient physical strength, and doesn’t mind getting wet.

Step 1: Look up and print a flood ornament or pattern online.

It is necessary to print the ornament.

Sensible guidance. Avoid selecting intricate or small drawings as they will not be visible from a distance. Furthermore, cutting such contours is extremely challenging; avoid making matters worse for yourself. Furthermore, there won’t be any beneficial outcome.

Step 2: Adhere pattern-patterned paper to a copper plate. You can use specialty ribbons for this. After adhering them to paper, the protective coatings are taken off of their backs. The adhesive stays on the paper after removal and can be applied to any topic.

On the back, double-sided tape is adhered.

Slicing in line with the outline

Take off the adhesive tape’s protective film.

Place a template on a plate of copper.

Step 3: Using regular or specialized scissors, cut the flower circuit. It is simple to cut thin copper plate.

Cut the weather vane’s outline.

Step 4: Squeeze the two even board segments firmly with clamps to fix the floodplain between them. At a right angle, bend one edge. The slide is between two and three millimeters long. It is necessary to prevent the current copper plate from deforming when the contour is further cut out. The pipe is soldered to the weight in the future.

Step 5: Begin cutting the pattern’s minute details. The supra-films must complete this after drilling holes of the appropriate diameter beforehand.

The hole’s preliminary drilling

Take your time and be extremely careful. If there is a minor infraction and the pattern shifts, it won’t be an issue because this is a unique and exclusive solution. The most important factor is that there are no critical deformations in the plate’s plane.

Utilizing a file to drink the pattern

Step 6: Take the paper off the plate’s surface and give it a thorough cleaning with a fine grinding skin.

Removing the paper from the plate

Step 7: Raise the hardness of platinum because it is too thin to withstand strong winds. It is best to use a brass wire with a 2-4 mm diploma for this. Lina ought to roughly align with the weathercock’s two lengths. It is preferable to use the circle of the corresponding diameter as a template when bending the wire so that it has an arc in the center.

Place the workpiece on the plate and adjust the wire shape as needed. Use any heavy object to press the details, use a special flux to process the rations, and connect the two elements. You can use a modern gas soldering iron or an ordinary electric soldering iron. The second tool can be used much more quickly and easily.

Now that the weather vine flock is ready, we need to start creating the other components. We will state up front that these processes are far more involved than the initial one.

Production of guide structures

You will have to decide for yourself, considering the products you have, what can be used from them, and how high of a quality they are. As we’ve already indicated, some of the weather vine’s components in our instance are constructed from vintage candlesticks.

Step 1: Remove the top section from the candlestick stand, insert a click in a vice, and solder a copper tube segment to it.

Keeping the candlestick’s tube attached to the stand

Its length, in this case 20 cm, should be 1-2 cm greater than the sail’s width. Soldering is a standard procedure; always abide by the safety guidelines. The truth is that when soldering copper, a satisfied aggressive flux is used, and it should dissolve the upper layer of metal. If not, the solder won’t bond with the copper.

Step 2: Attach the ornamental tip’s end. It is best to mark it independently from an appropriate alloy. If this isn’t feasible, utilize the manually accessible parts from other products.

On the end, a decorative tip is worn.

Step 3: Solder the weather vine flock on one side of the copper tube and the specially bent copper wires on the other. Pieces of wire are precisely positioned along the symmetry line from the opposite side, and the sail is fixed to the previously bent side. Since every element is ultimately contained within a single plane, it should appear elegant and symmetrical. Make different designs, twist wire into spirals, and add more ornamental elements if you’d like.

Step 4: Drill a copper tube’s end. A steel cone and a hammer are used for this. Place the tube upright on the cone and execute a collapse by blowing with the hammer from the other side. Aim for beauty in everything; avoid going overboard with the diameter increase. If not, the copper might crack; in this case, you would need to cut off the damaged end and resume work.

Transporting the tube while severing the ring from the border

Step 5: Carefully cut the tube’s end in the opposite direction of collapse. Using a specific cut is preferable because it leaves an exactly even surface that is perpendicular to the axis. However, only professionals require such a tool; not everyone has access to one. An ordinary metal hacksaw can be used to remove the tube’s end, and files can be used to fix it. The truth is that getting the perfect cut is extremely difficult, and you will almost always need to work with files.

Creation of a weather vane component

Step 6: Drive the coupling firmly inside the fractured tube. Then, since it is already substantially longer, another piece needs to be soldered. This tube is the body of the fluoroplast sleeve and inner axis. Proceed with extreme caution; every tube’s axis needs to be precisely on one line. Keep an eye on the elements’ positions while soldering and make any necessary corrections.

Step 7: Place a piece of fluoroplast that has been specially prepared into the lower end. He needs to slide into the phone firmly, without stumbling or tripping. The oil pump plunger should be inserted into a hole in the fluoroplast.

Fluoroplast and tube connection, along with a plunger (in the picture on the right)

Create a hole that is 0.1 mm smaller than the plunger’s diameter in order to make a connection with just a little interference. Because the plunger is composed of a very durable alloy of stainless steel, this element will operate dependably and for a long time. Reminding you once more that every component should lie on a single straight line is essential to the vaguer’s functionality.

Step 8: Obtain a weather vane, place all the components inside, and verify that it is rotating. It ought to be maximally free.

If desired, sulfur liver can be used to artificially age copper. Hazardous chemical compounds are released during the patination process, so you must wear rubber gloves and a respirator.

A brown mass known as "sulfur liver" is produced by sintering 1 g of sulfur with 2 g of potash or caustic soda. Over low heat, submerge the mixture in an iron spoon.

Melchior is stopped, which raises its temperature in a water-and-sodium sulfate solution.

Attach the propeller to the weather vane; we’ll walk you through the process a little bit below.

On the roof ridge, you can now install a ready-made weathercock. Select the location and drill the appropriate diameter holes. The work becomes much simpler if the skate has a metal bar. You’ll need to think of alternative solutions for ceramic coatings that are dependable and safe for the roof. A bitumen-impregnated strip of tape is used to seal the drilled hole before a weather vane is firmly placed inside of it.

Vital. The hole in the metal sheet, which has a thickness of approximately 0.45 mm, is the only reason the vaguer’s construction cannot be held together reliably. Additional components for fixing should be installed on the attic’s side if the roof is unsuitable. The base of the weather vane on the back of the roof cannot be reached if the attic room is of the attic type; instead, specific locations must be created for the product’s dependable attachment to a metal roof.

On the roof is a weather vane.

Prices for various types of solderingrs

Soldering iron

Materials Needed Tools Required
1. Small propeller 1. Screwdriver
2. Metal rod or wooden dowel 2. Pliers
3. Small ball bearings 3. Drill
4. Sheet metal or thin aluminum 4. Saw
5. Compass or protractor 5. Sandpaper
6. Screws and nuts 6. Paint and brush

If you’ve ever wondered how to give your rooftop a little whimsy and utility, building a weather vane out of a propeller can be an enjoyable and fulfilling project. It’s a wonderful way to combine artistry and practicality, giving your house a distinctive touch and letting you keep an eye on the direction of the wind.

It is not necessary to have expensive materials or sophisticated skills to make your own weather vane. You can create a weather vane that not only accomplishes its intended function but also sparks conversation among neighbors and guests with a few simple tools and a little imagination.

You can personalize the design of a weather vane with a propeller to fit the style of your house or to represent your personality. It is totally up to you what kind of materials and finishing touches you like—slick and modern or rustic and charming. This project can be a fulfilling way to demonstrate your do-it-yourself abilities and encourages experimentation.

Not only will your weather vane be a useful tool for determining wind direction once it is installed and spinning with the wind, but it will also be a unique, handcrafted addition to your roofline. It serves as a reminder that even easy projects can improve your home’s usability and aesthetic appeal.

Video on the topic

How to make a windmaker with a propeller. Do -it -yourself weather vane

Simple a weather vane without costs

Warger with propeller/screw on bearings 2024. Artmetal

Flueger Brot repeller. Three tricks for the maximum effect. Do it with your own hands. Self -hand

How to make a weather vane with your own hands? Woodlier with a propeller.

How to make a broker with a propeller with your own hands.

What do you think, which element is the most important for a reliable and durable roof?
Share to friends
Gleb Zuev

Exterior designer, author of books about roofing materials. I will help you make your roof not only reliable, but also beautiful.

Rate author
Add a comment