Installation of cornice and end bar for metal tiles

In order to guarantee the longevity and visual appeal of your roof, installing cornice and end bars for metal tiles is an essential step. These elements fulfill significant functional needs in addition to giving the piece a polished appearance. Installed along the edges of the roof, the cornice, also called the eaves trim, protects it from water damage and improves the overall appearance of the roof.

In contrast, end bars are put in place at the ends of metal tile rows to keep them in place and stop wind uplift. They are essential to the roof’s structural stability because they guarantee that the tiles will withstand weather and remain securely fastened. A durable and weatherproof roof requires proper installation of the end bars and cornice.

To guarantee a consistent and polished finish, alignment and spacing must be carefully considered during the installation process. Typically, end bars are positioned at predetermined intervals along the roof’s edge and tile rows after the installation of cornices. This methodical approach is essential to any roofing project because it not only improves the roof’s functionality but also adds to its aesthetic appeal.

Selecting the proper materials for the end bars and cornice is also very important. Typically, strong metals with a high corrosion resistance, like galvanized steel or aluminum, are used to make them. These materials give homeowners long-term protection and peace of mind by guaranteeing that the installed components withstand the trials of time and weather.

Classification and purpose of strips for metal tiles

The materials used to make cades and wind strips for metal tiles are the same as those used for the main roofing. The primary structural component is galvanized steel, which has a protective polymer coating and a thickness of 0.4–0.5 mm. The following is an expression of the functions that carry out the metal tile strips:

• The cornice bar is made in the form of an oblong element, which has a production technology similar to the main roofing material. The main function of the cornice of the bar is the protection of the frontal cornice of the moisture penetration with abundant atmospheric precipitation. As a result, the cornice bar protects the sub -circuit space from moisture.

• The end bar also has an identical production technology with sheets of metal tiles and is subject to fastening on the ends of the slopes, serves to protect the crate from moisture penetration and levels the wind load. As a result, this accessory is sometimes called a wind bar.

• The skate bar can take many forms and serves to protect the space under the roof from the penetration of atmospheric precipitation at the site of the converts of the slopes.

• The adjoining bar is a universal element that has decorative and protective functions.

Fastening the cornice of the bar

The cornice bar is fastened to the roof’s roofing in the manner described below:

1. First, the installation of a frontal board is installed, which is attached to the ends of the rafter system using galvanized nails. A cornice board is sometimes used as an alternative, which has mount in special grooves on the rafter system.
2. The next step will be a binder with a dodgy board or corrugated board. A support beam is attached to the wall of the house, it will be a second support for hearing a cornice overhang.
3. Immediately before the installation of the cornice of the bar, the installation of brackets for the drainage system is installed. They can have a fastening, both on a cornice board and on rafter legs.
4. After that, they start the installation of the cornice of the bar, which is installed in front of the flooring of the roof sheets of metal tiles. The installation of the bar is carried out on top of the drainage mount using screws screwed into the cornice or frontal board. The step between the screws is selected by an approximately equal 30-35 centimeters.

There should be an overlap with 100 mm in diameter when raising the bar’s cornice.

Installation of the end bar

They start installing the end bar after finishing the roofing material installation from the metal tile sheets.

The way it is installed is as follows:

1. The wind bar is installed at the height of the wave of the nearest sheet of the metal tile. It should be noted that the angle of the end of the roof should be completely blocked.
2. Fastening the end bar is carried out on the sides and on top with screws. In this case, the installation with self -tapping screws from above falls in the comb of the wave of a sheet of metal tile.
3. When increasing the wind bar, a overlap is made up to 100 mm.
4. All joints between this bar and the roof are necessarily sealed.

Apart from its protective purpose, the end bar also serves as a significant decorative element. The tile needs to cross over the wave’s crest to prevent water from leaking beneath a metal one. Choosing the edges of a metal sheet tile up is appropriate for these uses.

Installation of the ridge bar

Every time the ridge bar is installed, the subcutaneous ventilation device is checked for errors. Special planks are used on gentle metal tile slopes to prevent the horse from blowing snow under it. The horse is first placed on top of the end strips and then released outward by 20–30 mm to begin installing the ridge bar. Semicircular elements are connected along the stamp line, and the flat skate’s parts are cooked together with a 100 mm overlap.

The location of the subconic board installation and the techniques for securing the skate may vary greatly depending on the size of the slopes if the roof has an inclination of more than 45 degrees. During the attachment stage, the crate simulates how the ridge will be installed, accounting for the roof’s inclination angle and the ridge bar’s shape. The most popular installation option is this one because it’s easy to use and accessible.

A locksmith can be called to adjust the angles if they are not congruent between the skate bar and the roof’s slope. A semicircular skate bar should be installed, and then it should be drowned out on both sides with special accessories (plugs).

It is advised to install a wooden block beneath the ridge bar. This facilitates the design’s speedy installation on a wooden foundation.

How the adjoining bar is mounted

Following the installation of the wind bar and the primary layer of roofing material, the adjacent bar should be installed. Fixing the apple carpet on vertical planes is the primary goal of the adjustment plan.

Furthermore, the adjacency bar serves as the primary hermetic element at roof adjustment locations for stoves and ventilation ducts. The final step in the roof’s construction is the installation of this structural component.

The adjacent bar serves as a decorative element in addition to its protective function, giving the roof a contemporary appearance.

When installed correctly and serving their intended purpose, metal tile glazing will provide excellent protection against wind loads and atmospheric precipitation, which will unavoidably impact the longevity and dependability of the system.

Installing end bars and cornices for metal tiles is an essential step in making sure your roof is functional and long-lasting. These elements not only improve the visual appeal of your house but are essential in shielding the roof’s edges from the elements.

Careful attention to detail is essential when installing the cornice. It acts as a barrier to prevent water intrusion as well as a decorative element. When cornices are installed correctly, rainwater is diverted away from the roof’s edges, reducing the risk of water damage and preserving the roof’s structural integrity over time.

On the other hand, end bars give the rows of metal tiles a safe, finished look. They guarantee that every tile is securely fastened, lowering the possibility of uplift in the event of high winds or inclement weather. By keeping the tiles from moving or loosening over time, this not only increases the roof’s stability but also extends their lifespan.

For long-term performance, you must select high-quality materials for your end bars and cornice. Materials that are durable and resistant to corrosion, like aluminum or galvanized steel, are frequently utilized. By making an investment in dependable materials, you can be sure that your roof will withstand severe weather conditions without losing strength.

To sum up, installing cornice and end bars for metal tiles is more than simply a decorative element—it’sessentialto guaranteeing the durability and efficiency of your roofing system. Through meticulous attention to detail and the use of high-quality materials, homeowners can improve their roofs’ long-term functional dependability as well as their aesthetic appeal.

"Knowing how to install the cornice and end bar correctly is essential for both practicality and visual appeal when installing metal tiles on your roof. These elements greatly improve your roof’s overall aesthetic appeal in addition to increasing its longevity. This article offers a comprehensive how-to for installing and maintaining cornices and end bars, which will guarantee a visually appealing and long-lasting roof that can easily weather the elements."

Video on the topic

Installation of the end bar. Common mistakes and how to make it right.

Installation of a ventilated skate and wind planes on a GOST Metalocerepitsa with your own hands

Installation of wind and moisture protection, hooks, cornice bar. Part 2.