Installation of Ondulin

Are you considering adding Onduline roofing to your house? Homeowners favor Onduline because of its dependability, affordability, and simplicity of installation. Whether you’re building a new building or replacing an old roof, Onduline provides a workable solution that blends aesthetic appeal and functionality.

Bitumen-impregnated organic fibers are used to make the durable, lightweight onduline roofing sheets, which are resistant to a variety of weather conditions. Because of this, it can be used in both commercial and residential buildings. Simple installation makes it accessible to both professional roofers and do-it-yourself enthusiasts.

Onduline’s adaptability is one of its main benefits. It can be applied to many types of roof designs, such as flat roofs, pitched roofs, and even curved roofs. This adaptability guarantees dependable protection against wind, rain, and UV radiation while enabling innovative architectural solutions.

DIY Ondulin installation – features of technology

Recommendations for the installation of roofs from Ondulin

List of rules for the installation of ondulin roof

1. When the roof of Ondulin is performed, builders have to move directly over new sheets of coating. In order not to damage and deform the Euro -shifer, it is better to walk in convex areas (waves), and the furrows (recesses) try to avoid between them.
2. Roofing work using ondulin can only be performed at positive temperatures, exception is only a small urgent repair of individual sections of the roof, when laying with maximum caution at temperatures is up to – 5 degrees. Low temperatures, just like too high (more than +30), are unfavorable for the installation of roofing sheets.
3. For durable fastening of the canvas, each sheet is fixed to the crate using special nails or self -tapping screws with special hats. Fasteners are evenly distributed over all the surfaces of the Euro -Shifle, only on a sheet of standard sizes (read: “The size of the leaf ondulin – technical characteristics”) is expected 20 nails. This technology guarantees reliable fastening of the material, in the case of some deviations, the coating with strong winds will be destroyed.

-A continuous crate is required if the angle is less than 10 degrees;

-with a slope of 10 to 15 degrees, the crate’s components are fastened at 45-centimeter intervals;

-On steep roofs with 61-cm steps, a crate is positioned.

• According to all the rules for using ondulin, when installing sheets, the formation of 4 overflows should be avoided in one corner, which is fraught with deformation of the fixed edge of the material.
• Thanks to the special technology of production, the weight of the material is much less than the weight of other similar coatings, so working with it is much more convenient, moreover, if ondulin installation, the instructions are fully observed, then the roof of ondulin will completely retain its qualities throughout the entire service life.
• Ondulin has good flexibility, but this property should be used only within the permissible. So, a strong stretch of the sheet and its fixing in this position to the crate can cause its cracking. It may initially seem that the canvas lies evenly, but after a while, waves will appear on the roof flooring, which will gradually begin to increase and, ultimately, destroy the coating.

DIY installation instructions for Ondulin

One of the easiest roofing materials to install is ondulin, which is made into light, wavy sheets with relatively small dimensions. Ondulin installation can be done independently, but precise attention to detail is needed to ensure that the finished roofing can withstand atmospheric influences and dependablely protect the building for many years of use.

The main characteristics of the material

For fifty years, ONDULINE has been manufacturing light slate. Businesses are currently releasing this brand’s leaflet material in a number of European and international nations. Ondulin has become well-known as an aesthetically pleasing, practically sound, and quickly and easily hand-mounted roofing material.

The material’s characteristics, which are characterized by wavy sheets measuring 2000×950 mm and having a thickness of 3 mm, determine the installation technology. The compressed cellulose fibers that make up Ondulin’s foundation. With modified bitumen, the basis of the basis is ensured by resistance to moisture and biological destruction. Heat-confirming resin and a layer of sprinkled minerals make up a robust outer layer. Ondulin is a decorative material that comes in a variety of traditional hues.

Owing to its lightweight nature, ondulin can be installed directly on the rafter system (during the building or reconstruction process) or on the previous roof, directly on top of a level surface roof repair.

Among the benefits of ondulin are:

• simple installation without the use of a specialized tool;
• small weight;
• resistance to temperature drops and atmospheric influences;
• durability (up to 50 years, provided that the installation rules are observed).

Lack of ondulin results in combustibility (maintenance of combustion), which calls for careful consideration when designing a solid fuel stove or fireplace’s chimney.

When selecting ondulin, the following characteristics of the substance need to be considered:

• It has a rough surface, due to which the snow lingers on the roof with a small angle of slope of the slopes;
• At low temperatures, the material becomes fragile;
• In the heat or under prolonged exposure to moisture, the ondulin softens and is deformed with increased local loads.

As a result, in certain weather circumstances you should not walk along the Ondulin roof, and on roofs with small incline slopes, a continuous crate needs to be installed beneath the roofing floor.

Preparation of the rafter structure for Ondulin

Ondulin can be installed on any kind of roof, even ones with intricate structures. The material can be styled on curved surfaces because it bends both along and across the sheet. Considering the roof’s inclination, you must correctly execute a crate before constructing a roof flooring by hand.

The slope is between 5 and 10 °. The roof experiences higher load loads when the roof slope is slightly inclined. For Ondulin, a sturdy crate constructed of boards or sheet wood is required (plywood, chipboard, OSB).

In order to guarantee the coating’s dependability and minimum bias resistance to moisture on the roof, ondulin should be laid with a 300 mm vertical overlap and two wave-shaped side overlaps. The useful area of the sheet and the quantity of material needed must be determined before any material is acquired.

Slope: between 10 and 15 degrees. To lay Ondulin, you must remove the crate from the boards using your own hands. Measuring along the axes of the boards, the crate’s step is 450 mm. The roofing material is installed with a 200 mm vertical overlap and a single wave of side overlap.

Slope with a gradient greater than 15 °. The boards that make up the crate beneath the Euro-shifer have a pitch of 600 mm when measured along the axes. One wave makes up the lateral overlap, and 170 mm is the value of the vertical overlap.

The useful area of the sheet is 1.6 – 1.64 kV.m. according to the guidelines for laying ondulin on a roof with an angle of inclination of more than 10 °. The total area of the roof must be divided into a usable area of the sheet in order to determine the quantity of material needed for purchase.

Using a specially made wooden template template will make the process of installing the crate with your hands easier and faster. It makes it simple to install the crate boards exactly parallel to the cornice and at an equal distance from one another.

The main stages of the installation of roofing flooring

Laying technology for ondulin is very basic. Tasks are completed in phases.

1. Marking sheet material. Ondulin has the shape of a traditional wavy slate. For markings, it is recommended to take a colored pencil, a contrasting in relation to the color of the euro -shifter. So that the marking lines are even, it is convenient to use a wrapping of the same material as a ruler.
2. Cutting sheets. In order to independently cut the leaf of ondulin along or down, it is enough to use the usual knife habill on the tree. So that the sheath of the hacksaw does not get stuck in the process of the sawing, it is recommended to be slightly lubricated with oil during operation. For cutting ondulin, you can also use manual or circular electric saw.
3. Installation of sheets. The lifting of the material on the roof does not require the use of devices – the ondulin sheet weighs about 6 kg. To properly lay the Euro -shifer, it is previously required to determine the prevailing direction of the winds in the area. The installation of Ondulin should begin with a leeward slope. The first row of ondulin is the first to mount, starting from a whole sheet. The second row is required to start with half the sheet to minimize the number of overlap at the side junction. The use of a stretched rope will help to put the sheets of material strictly parallel to the cornice.
4. The fastening of Ondulin. It is necessary to fix the sheet material using nails (about 20 pieces per sheet), which are clogged at the ends of the sheets in the lower part of the wave and in the overlap. Fasteners should fall on the bars of the crate. If Ondulin is mounted with his own hands according to the crate made of metal, self -tapping screws are used as fasteners. It is more convenient to tighten them with an electric drill, but it is necessary to accurately calculate the tightness power in order to avoid damage to the material.
5. Installation of the ridge element. Fasten the ridge element is required to the additional label boards. Nails are driven into the outer parts of the waves of the Odulin, fitting with the skate element.
6. Decoration of yards, forceps, ribs of the roof, side junction of the roof. For these purposes, corporate materials of Ondulin – valleys, ridge and forceps are used. In places of joints, it is recommended to provide additional waterproofing.
7. Installation of a roof fan. The element is mounted on each wave in places of conjugation with sheet material. The upper sheet should have a overlap on the base of the roof fan.
8. Remove the gaps between the sheets with our own hands. If you need to eliminate the gaps between the roof flooring and the cornice or the skate, a special filler is used. In this case, it is necessary to take care of the ventilation of the roof pie and the attic.
9. Installation on the roof of the Ondulin ventilation pipes. The pipe is attached with nails along each wave of the base, while its upper part is mounted over the base on top of the base.
10. Ventilation comb on the roof. This element prevents poultry and insects from entering the roofing pie. The ventilation comb is installed on the cornice under the sheets of the Euro -Shifle. Attached with nails.

The Euro-Shifter installation guidelines specify that premium waterproofing joints, roof cornices, and other trouble spots need to be given extra consideration. The manufacturers of Ondulin roofing advise utilizing Onduflesh tape, which is specially made.

Using the Ondulin installation instructions, you can build a sturdy, dependable, and long-lasting roofing with your own hands. You can achieve an aesthetically pleasing roof that flawlessly blends in with the overall design of your home, business building, or other construction by utilizing branded extras.

Follow these instructions to install the Dojulin on the roof by hand. Rules and technology for independently installing a Euro-shifter on the roof.

Ondulin roof and installation instructions – all the most interesting in one article

Prior to applying a covering material, the roof is hydrolyzed, ventilated, and has a vapor barrier. Depending on the intended use of the roof, the crate on which the roof structure is assembled is where all of the layers are placed.

Roofing pie refers to the layers of the roof that must be covered with the roof. Every layer in the roof pie serves a purpose and fits according to a set of guidelines. The functional purpose of the entire roof is completely disrupted in the event that at least one layer of the roof pie is not laid.

Certain variations may occur in the sequence, styling technique, number of layers, and design of the roof, depending on these factors. This article will teach you how to determine the number of roof sheets and how to properly apply ondulin.

Ondulin coating

Asbestos is not present in ondulin, a fibrous roofing material composed of natural organic materials that is fairly strong. Ondulin’s roof is sometimes referred to as a "Euro-shifer" because it resembles a cement slate. Ondulin, like any material, has benefits and drawbacks.

• water resistance. The material in the manufacture is impregnated with a special water -repellent solution, which prevents the penetration of water drops into the structure of the material;
• Acid and alkalis resistance;
• frost resistance;
• hygiene and environmental Safety material;
• ease. The same in size asbestos -cement sheets of slate have a weight four times higher than the similar sheets of the euro -shifter;
• Easy installation: it is easy to cover curved roofs, it is easy to cut and lay out the sheets;
• Good Noise insulation;
• durability. Despite the service life of Ondulin up to 15 years declared by the manufacturer, the coating of from can last three times longer;
• acceptable price.

• Pretty fast Loses color saturation;
• Fire resistance. Given that the material is made of organic substances, its fire resistance is very weak;
• strength. The strength of the material can be attributed to the disadvantages. The strength of the Euro -shifer directly depends on the correctness of its styling (laying angle, tilt, label step). If the installation is disturbed, the strength indicator is primarily suffered;
• Srustration to biological phenomena. It is noticed that mosses and fungi often settled in poorly lit places of the roof.

Even with its drawbacks, Ondulin roofing is still more common, particularly because of its benefits that guarantee the coating’s quality.

How to make a crate

The crate, which serves as the foundation for the roof and is installed subject to certain regulations, is the framework of the roof structure. The bars (or boards) that make up a fiber ondulin’s crate have a section that measures between 40 and 60 mm. Coniferous trees are typically used to make wood bars.

Prior to the crate being installed, the crate’s material Make sure you use an antiseptic when impregnating.

There are multiple steps involved in the execution of the crate under the Euro-Shifer:

1. Attaching waterproofing material to rafters. It is mounted at the junction and fixed with a stapler;
2. The bars on the overhang are attached to the edges of the roof and along the end holes, forming the cornice. In this case, the board from the base of the canopy should be a large section, and the step between the bars must be done less. The protrusion of the first board must exceed the width of the cornice;
3. In parallel to the cornice, the rest of the labels are installed. To accurately observe the parallel and the step of the crate, you can build a wooden template;
4. consolidation using self -tapping screws of gutters;
5. no more than 4 cm from the base of the cornice board is attached to the wind board;
6. attachment of the ridge and components of elements.

When installing the crate, there are a few details to consider:

• Before installing the crate, you should measure the diagonals and sides of the roof using ropes fixed at the corners. Their equality provides the correct shape of the roof;
• If the length of the beam is shorter than the width of the roof, then the mounting of the boards should be performed in a checkerboard pattern;
• the height of the boards at the joints of the connection of the end parts should be the same .

The roof’s angle determines the crate’s step.

If any of the guidelines for the crate installation are broken, the coating installation will also be interfered with, which will have unfavorable effects. How can I lay ondulin without making any mistakes? Let’s go into more depth about this.

How to fix ondulin to a crate correctly

Ondulin is not a material that takes a lot of time or expertise to install.

Installing Ondulin on your own is very easy. Rules for mounting:

• Before covering the roof by ondulin, it should be Determine the wind rose, and start coating from its opposite side;
• how to lay ondulin on a roof? For a flat attachment of ondulin paintings, a longitudinal line should be carried out before installation, which will become a guide to laying sheets;
• Weather phenomena affect the quality of styling: Ondulin is laid with positive indicators of the thermometer, but not more than +30 ° C;
• When moving along the roof, you should use a staircase, or special bridges;
• To facilitate sliding when cutting the canvas, The hacksaw should be moistened with water or lubricated with oil;
• For flat marking on the sheets, it is advisable to use the edge of another sheet or a rope, and apply the line with color (different from the color of Ondulin) with a pencil;
• You should not stretch the leaf of ondulin more than 1 cm, otherwise, when the temperature is reduced, it can be deformed;
• Without fail, when coating the roof, ventilation should be installed, which will save the tree and layers of insulation from the formation of condensate. In this article, we talked in more detail about the attachment of Ondulin.

Ondulin is affixed with nails in a checkered design.

When basic styling guidelines are broken, the coating frequently loses its properties. Prior to learning how to lay ondulin correctly, you must determine the roof’s angle of inclination.

The angle of inclination of the roof for Ondulin

The width of the overlap of sheets across and along the sheet, the nipple step, the laying plan, and the angle of the roof all play a role.

The coating technology is determined by the slope’s angle of inclination in the following ways:

A continuous crate has an inclination angle of less than 10 °. The best materials for this kind of crate are boards, OSB, and plywood. In this instance, Ondulin is covered with a double-wave overlap that extends 30 centimeters down the sheet.

The roof’s minimum inclination from Ondulin is 6 degrees;

The crate’s step should be 45 cm, the overlap’s width shouldn’t be more than 20 cm, and the overlap should be one wave when the roof is tilted 10 to 15 degrees;

The crate’s step should be 60 cm when the angle of inclination is greater than 15°, and the overlap’s width should not exceed 17 cm when there is only one wave ceiling.

Roof calculation on the roof

The consumption of ondulin ought to be computed during the design phase. Unnecessary expenses can be avoided in this situation. We suggest using our roof calculator instead of doing calculations by hand.

The standard sheet of the Euro-shifter measures 200 cm in length and 95 cm in width. Such a sheet has an area of 1.92 meters. Without overflows, the material’s useful area is calculated and can be 1.3 kV, 1.5 kV, or 1.6 kV. m.

In order to compute the material’s consumption, the following indicators must be identified:

• useful area of ​​covering material. Depends on the angle of inclination. The multi -sized roof shape is calculated from the totality of the areas of each of the slopes;
• Roof area. It is determined by adding the areas of all slopes by mathematical formulas of figures (trapezoid, square, rectangle, triangle);
• The number of sheets of material. It is determined by the division of the area of ​​the entire roof into a useful area of ​​one canvas of the material.

Accurately calculating the longitudinal overflows is crucial as it can drastically lower the quantity of scraps. Full-length sheets should, if at all possible, be used to cover the upper row as their height will lessen the ridge element.

To get the right Ondulin calculation, there are a few more additions:

• When calculating, it should be additionally added 10% or 15-20% respectively, to a simple roof or complex roof with different angles and transitions;
• Additional elements (ridge, yendov, forceps, aprons around chimneys and windows, junction of the junction) require additional coating ondulin;
• When calculating Ondulin mixed color scheme, you should schematically depict the roof design on a reduced scale and calculate the consumption of sheets of each color separately.

The number of euro-shifers for roofing can be calculated more precisely and with great ease thanks to special programs designed to calculate the consumption of covering material.

Ondulin – Installation Instructions

The coating should be applied when the crate is positioned in line with the inclination angle. Steps for installing Ondulin:

1. The laying of Ondulin begins from the edge of the roof;
2. If four sheets of Ondulin were laid in the front row, then the second row will consist of three and a half sheets: the first sheet is cut across in half and laid. The laying of ondulin on the roof is made in the overlap on the lower row, The length of the overlap should be about 12 cm, and the side overlap should not be wider than one wave;
3. an article on how to fix the sheets of Ondulin to the crate;
4. The skate parts should be fixed on the slope to the additional bars of the crate. The fastening is made from the inside of the joints of the joint with bars of the material;
5. Endovs (docking angles of slopes) are made from the starting coating and must be attached to an additional crate;
6. the twist of the roof is ensured by bumping the edge of the coating canvas to the pinch board. The length of the slope and boards must match;
7. The ribs of the roof are covered with tongue or skating elements;
8. The side joints that are adjacent to the wall located in an upright position to the junction are made out of Ondulin;
9. The installation of a roof fan occurs along the waves in the places of their connection. The base of the fan should not go abroad of the upper sheet;
10. Often on the roof, a roofing window is fixed, which joins with a sheet of the coating, and the upper canvas is laid over;
11. In order to avoid gaps between the canvases of ondulin and additional elements of the roof, a special filler is used;
12. Installation of waterproofing and purge elements.

Installation instructions for Ondulin (tile)

You now understand exactly how to lay ondulin. Regardless of the chosen roof design, all phases of roof covering offer distinct Ondulin laying. The flow of events yields a favorable outcome.

Waterproofing and vapor barrier for ondulin

Ondulin’s manufacturers advertise their product as a coating that eliminates the need for additional waterproofing or vapor barriers to be installed. Simultaneously, it is advised to equip the room’s (or attic’s) roof with the waterproofing layer that needs insulation. Installing a vapor barrier membrane from the side is something else we advise.

Extra ventilation and waterproofing components:

1. The waterproofing of the roofing cornice is provided by a special box, which is attached to the base of the leaf overhang;
2. Ventilation is provided by ventilation pipes, which, like the window, are attached with self -tapping screws over each wave of coating;
3. To protect against insects, a ventilation comb is mounted in the gap under the cornice;
4. The joints of Ondulin canvases glue the tape (Onduflesh) made by the manufacturer;
5. The junction of the windows, Endov and other joints with the roof, cornices are also glued with adhesive tape;

DIY Ondulin laying: comprehensive guidelines

The most common way to guarantee vapor barrier is to lay a specific vapor barrier material. A roofing pie ought to be placed on top of such a layer.

Conclusion

If you study the work principles and consider the subtleties of the installation, you can cover the roof with ondulin of fairly high quality. Even though the subject matter is fairly simple, only one person will be able to complete it.

This post will explain what Ondulin is and provide step-by-step installation instructions. We will explain how to apply ondulin to a roof manually using specialized technology, examine a roof pie’s device to determine ondulin content, and determine the proper angle for a private home’s roof.

"Ondulin is a versatile roofing material that is known for its durability and ease of installation. At "All About the Roof," we delve into the practicalities of installing Ondulin." This post walks you through the process of installing, positioning, and fastening Ondulin sheets step-by-step and provides information on the necessary tools and important factors to ensure a durable, weather-resistant roof. Whether you’re a professional roofer or a do-it-yourself enthusiast, our all-inclusive approach gives you the tools you need to successfully apply Ondulin roofing solutions for your projects."

Installation of Ondulin: step -by -step instructions

France is the country that gave rise to the widely used roofing material Ondulin.

In the 1940s, local engineers came up with the invention.

In other nations, the content quickly gained popularity.

And he entered our nation more recently.

They started using it with us not even twenty years ago.

Because of its excellent technical and functional qualities, the material became one of the most widely used roof finishing materials very quickly.

Technical characteristics, advantages and disadvantages

Sheet roofing material is called ondulin.

200 x 95 cm is the sheet size.

Hofra stands 36 mm tall.

The sheet has 1.6 square meters of usable area.

After all, there is an overlap in the roofing material when it is installed.

And now is a crucial moment!

The overlap should be considered when determining the quantity of material needed.

Only weighs 6 kg for the leaf ondulina.

Which weighs precisely four times less than slate made of asbestos.

Mounting light material is quite simple.

Furthermore, one person can easily lift a leaf off the ondulin on the roof.

• cellulose fibers;
• mineral filler;
• polymer resin impregnations;
• bitumen, for cleaning which a special technology is used;
• Environmentally friendly pigments.

1. Durability. If the technology was not violated during installation, then the service life is 25 years. The manufacturer"s warranty is 15 years.In European countries, ondulin roofs are still being successfully operated, which were arranged 50 years ago.
2. Environmental purity. Environmentally friendly natural materials are used for the manufacture of sheets of material.In most southern countries, where in the summer problems with water, rain water is collected from ondulin from ondulin.
3. Strength and endurance. The material is very easily withstanding a mass of snow cover.However, you should know that when the temperature drops very low, ondulin becomes fragile.
4. Light weight. As already mentioned, the leaf ondulina weighs only 6 kg.Transport, lift it on the roof and mount it very simple.
5. A variety of color solutions. For coloring, pigments are used exclusively on a natural basis.And natural dyes are distinguished by natural shades of color and durability. It is very easy to choose the material of the color you need and shade.
6. Good heat – and moisture insulation. Ondulin not only reliably protects the attic building of the house from moisture, dust and street noise, but also effectively prevents the exit to the street.

When discussing Ondulin’s drawbacks, it is important to highlight its poor fire resistance.

Ondulin burns poorly despite being specially processed and having special additives added to its composition, but it ignites when the temperature reaches 250 to 300 degrees.

It has already been mentioned that Ondulin becomes brittle in the cold.

However, there is a very easy solution to this issue: the labels are filled with a smaller step.

The material has a low resistance to extremes in temperature.

Summertime heat waves cause sheets to get softer.

Furthermore, the material becomes brittle in the cold.

The smell of bitumen wafts in the summer heat from the oniline roof.

Installation technology

Ondulin is typically installed on attic floors, where the crate’s step measures 450 mm.

Installing the material independently in accordance with installation technology is made possible by its slight weight.

There is no need for additional preparation in order to install ondulin.

There are some guidelines that must be followed:

• If the roof of the slope angle is from 5 to 10 degrees, then the crate is installed continuous. To do this, use processed boards or plywood.In this case, the end overlap should be 300 mm. And the overlap of the side – two waves;
• If the angle of slope of the roof slopes is in the range of 10 – 15 degrees, then the labels are stuffed with 450 mm pitch. In this case, the overlap at the ends is 200 mm, and the side of the side is one wave;
• If the angle of inclination is more than 15 degrees, then the crate can be made along the axes with a step of 600 mm. The value of the end overlap in this case is 170 mm, and the side overlap is equal to one wave.

More about figuring out how much roofing material to put on the house’s roof.

Check out the link to learn how many nails are required for a leaf ondulin. concerning how to score nails into ondulin as well.

Watch this video to learn about the installation of Ondulin. Technical details of the substance, rafter system setup, and how to tell a genuine ondulin from a fake.

Mounting Onedulin follows these steps:

1. Bars of crate to rafters are nailed along the axes. Nailed with a step depending on the angle of inclination of slopes.
2. To lay the sheets of Ondulin begins from the edge of the slope in the direction of the blowing of the prevailing winds. The mount of the second row begins with half the first sheet of the previous row.That is, a displacement of half a sheet is made.
3. The leaf of Ondulin is attached to the battens of the crate using special nails. Such nails, as a rule, have a hat of polyvinyl chloride or polypropylene.

At the end of the sheet, in the depths of the wave, nails become clogged. Moreover, jam nails into the ground on both sides. The wave is used to carry out the fastening to the crate’s intermediate bars.

• Nailing of nails is carried out on both sides. The sheet is also nailed in the middle through the wave.Only 20 nails are consumed per sheet. If you have never nailed ondulin before, then you should use a cord for strict alignment of a number of nails.
• Like Euro -shifer, the skate elements are attached on a slope, which is located opposite the direction of the wind. The skating element also attachs with nails to the bars of the crate inside the waves of the Ondulin sheets.
• A special material for ondulin roofs is used for the device. Initially, an additional crate is installed on which the material is laid for the design.
• For the design of the forceps, a special forceps are used, which are quite a lot in the assortment. If such an element is absent, then you can bent the extreme part of the oniline leaf and be beaten with nails to the pinch board.
• Ribs of roof stiffness are also designed using forceps.
• If the side joint of the roof adjoins the vertical wall, then this place is designed with the help of the yendova, which is made of ondulin. At the junction of the junction, the isolation is necessarily added additionally.
• In those places where the junction of the roof and the vertical wall is produced, a apron is used, which is also made of ondulin. The joint is additionally sealing to avoid moisture from getting inward.Nails are used to fasten the apron.
• If it is required to eliminate the clearance between the cornice and the sheets of ondulin, then a special filler is used. If the ventilation of the attic is not provided, then you can do without filler.
• In order for the waterproofing of the cornice to be high -quality, a universal cornice is used.
• If you need to arrange a ventilation canal on the roof, then special pipes are used, specially made for onilin roofs. Such a pipe is attached with nails on each wave.The upper part is laid over the base.
• If the rafter system of the roof and the crate are made of metal, then self -tapping screws are used for fastening. At first, a hole is made using a drill, where the self -tapping screw is then twisted.
• For waterproofing joints between Ondulin sheets, the Ondufresh self -adhesive tape is used, designed specifically for this material. The tape is also very effective for waterproofing places where roofing windows are connected to the roof, to give the finished type the junction of the yendova with the roof, for the waterproofing of the cornices.
• As a reliable vapor barrier, a special lining material Ondutis R70 is used.

Installation on roofing material

Developers frequently choose to use a different type of roof after experiencing problems with roofing materials.

And they frequently select ondulin.

Since installing ondulin sheets does not require removing the roofing material layer.

You should clear the roof of any trash before moving forward with the roof arrangement.

Next, a thorough inspection of the roofing material is necessary.

Open all of the formed bubbles and remove the swollen roofing material.

The end of the roofing material needs to be cut on the slope’s lower cut.

Make every effort to keep the roof clean.

They typically arrange a crate on the roof using roofing material in the same manner as in the conventional method.

And adhere the material sheets using the previously mentioned method.

The way that ondulin is installed on the roofing material does not differ significantly.

One of the most widely used roofing materials nowadays is Ondulin. Ondulin has the best price/quality ratio available. It is incredibly portable.

Materials Needed:	Ondulin sheets, screws, hammer, saw, measuring tape, gloves, safety goggles
Installation Steps:	1. Measure and cut Ondulin sheets to fit roof dimensions. 2. Secure sheets to roof using screws, starting from the bottom and overlapping each sheet. 3. Ensure each sheet overlaps correctly to prevent water leakage. 4. Install ridge caps at the roof peaks for added waterproofing. 5. Check for any gaps or loose fittings and secure them. 6. Clean up the work area and dispose of waste properly.

Installing Ondulin roofing is a sensible option for homeowners who want to strike a balance between durability and affordability. Because of its light weight, installation takes less time and labor, and it is easier to handle. The seamless interlocking of Ondulin sheets creates a watertight barrier that improves defense against leaks and weather damage.

Ondulin’s adaptability to a variety of climates and environments is one of its main advantages. Ondulin roofing adapts well to any climate, be it severe heat or torrential rain. Its composition consists of cellulose fibers impregnated with bitumen, which offers superior UV protection and long-term durability without the possibility of corrosion.

Furthermore, it’s important to consider Ondulin roofing’s aesthetic appeal. It can enhance the overall appearance of your home and complement various architectural styles, coming in a variety of colors and textures. Due to its adaptability, homeowners can accomplish their aesthetic and functional objectives without sacrificing performance or quality.

In summary, choosing Ondulin roofing provides a dependable, affordable option that maintains both durability and visual appeal. With its reliable performance and simple installation, Ondulin offers peace of mind whether you’re starting a new building project or replacing an old roof.

Video on the topic

Cooked | The cut of the roof ondulin | Installation of Ondulin