Installation of the tiles Ondulin: A step -by -step overview of the technology of work

Here at "All about the Roof," we explore the nuances of roofing installations and technologies. We’ll walk you through the entire Onduline roofing tile installation process step-by-step in this post. Due to their well-known strength, resilience to weather, and simplicity of installation, onduline tiles are a preferred option for both contractors and homeowners.

To ensure a sturdy and long-lasting roof, installing Onduline tiles requires careful planning and attention to detail. Whether you’re installing a new roof or replacing an old one, knowing the tools and methods required will help you finish the job professionally. Every stage of the roofing process, from preparing the roof surface to installing the tiles and adding finishing touches, is vital to the overall durability and quality of your roof.

The roof surface must be prepared before Onduline tiles can be installed. This entails making certain the roof deck is dry, clean, and debris-free. An easy installation process is facilitated by proper preparation, which also helps avoid problems like mold growth or uneven surfaces that could compromise the integrity of the tiles.

The Onduline tiles are laid after the surface has been prepped. This is taking precise measurements and cutting the tiles to match the size of the roof. Because onduline tiles are sturdy but lightweight, handling them during installation is made easier. With their seamless interlocking design, they form a weather-tight barrier that keeps out wind, rain, and other elements.

Securing the tiles in place comes last after they have been laid. Usually, screws or nails are used for this, depending on the precise installation instructions that Onduline provides. If the tiles are properly fastened, they will stay put and resist the effects of time and weather.

Through adherence to this comprehensive guide on Onduline tile installation technology, you can guarantee a fruitful roofing endeavor that amplifies the visual allure and structural soundness of your residence. Keep checking back as we go over each stage in-depth and offer advice and suggestions to help you use Onduline roofing tiles to achieve a polished finish.

Stage I. Roof design

Actually, the roofing is made of wavy bitumen sheets, which are now referred to as onilin. These are bitumen-impregnated fibers, either organic or inorganic, that are arranged in ten waves and have a compressed multi-layer structure.

Additionally, some manufacturers coat wavy bituminous sheets in extremely thick acrylic that provides excellent wind, rain, and UV protection. The smoothness of the surface structure makes it easy to remove dirt that settles on the roof and ensures it disappears completely.

For this reason, the composition of Ondulin is what makes it what it is. Basic ingredients include natural cellulose (found in people’s cardboard), resin, bitumen contaminants, natural dyes, and mineral granules for stiffness.

In a factory setting, bitumen is mixed with additives and applied to cellulose at a high temperature. The resulting mixture is then invested in a special unit, where mechanical pressure forms it into a neat, wavy shape. That’s it! When the roofing material is complete, it is light, comfortable, and simple to cut with a regular hacksaw (as opposed to metal tiles, which require a disc saw).

Ondulin is not like any other roofing at all. Because of this, even though installation seems straightforward, it is really simple to go wrong and ruin this lovely material. And in order to prevent them, let’s first examine the characteristics of the Euro-Shifle and how you can turn it with it in particular.

No matter who made it, this type of roof looks like this:

Here, choose the roof pie even during the design phase. You can create a warm roof for a future attic as well as a cold roof under Ondulin. If we are talking about corporate material, it is untrue that Ondulin supposedly melts in the heat and spreads an unpleasant bitumen smell.

Naturally, artisanal production might not be acceptable without identifying marks. Furthermore, bitumen patches even emerge under the sun’s rays in places like Gutta where the Euro-Shifer is plainly not meant for such a hot and sunny climate. Consequently, consider how safe your home’s roof is.

Additionally, it will be essential to arrange the ventilation of such a roof correctly during the installation process. To make understanding these ideas easier for you, we have prepared the following illustration:

Finding the right amount of sheets for a sloped roof is not hard; the key is understanding how much of each sheet will be useful. As a result, Ondulin is available in three different versions, each with a unique design, size, and functional area. For instance, Ondulin Compact sheets are small in size, Ondulin Smart has an extra "smart" Smart Lock castle, and Ondulin Diy has fewer waves.

The area of the sheet that is considered specifically useful is the area that does not include the end or lateral overlap. All that needs to happen is to divide the slopes’ area, and the precise number of sheets will emerge. But keep in mind that the overlap is directly correlated with the roof’s inclination angle; the greater the angle, the less overlap there is, and vice versa.

Therefore, it is typical to mount ondulin with a side overwhelm in a wave at large angles of inclination, and to overlap in two waves at a small angle. On the other hand, the more the roof’s slope, the more the ends overlap since leaks during a downpour, a strong wind, and a puddle of melted water must be avoided.

Stage II. Studying the features of work with ondulin

For convenience, the people refer to anything with wavy bitumen tiles as "people." However, there are quite a few producers of this kind of roofing, and their goods essentially look the same. However, the sheet size, a practical area, weight, and fastening features – yes:

Euro -shifer from ONDULINE

Let’s examine the most common variety of "Ondulin" in Russia. This is Ondulin’s roofing, provided by ONDULINE, a French company.

There are four different types of releases. Actually, the only differences between them are in size and a few minor chips. Let’s examine each one of them:

Classic Ondulin works well on vaulted roofs with a radius of at least five meters and flat roofs with an angle of at least five degrees. 200 by 95 centimeter sheet, 6 kg in weight, 3 mm in thickness. There have been rumors that this kind of ondulin is no longer produced.

The attachment points, lighter weight, and smaller, more "intelligent" Smart Lock Castle of Ondulin Smart already signify a new generation. These are some of its benefits:

• This is a good hydraulic tank, thanks to which the overlap of sheets is reduced by as much as 5 cm, from 17 cm to 12 cm, and this is at the same step of the crate.
• Thanks to the depressed stripes of the castle, water is excluded under the sheet.
• The strips themselves serve the guides when laying sheets, so the general type of roof ultimately looks more neat and geometrically accurate.

The weight of the completed roof is greatly facilitated by all of this. Additionally, Smart Ondulin receives new nails that have unique hats that don’t open over time (previous analogues sin with this). This sheet is 195 x 95 cm in size and 3 mm thick. Each sheet has ten waves, just like in the classic.

DIY is another kind of ondulin. It was designed exclusively for standalone installation due to its smaller dimensions (200 x 75 cm, 3 mm thick, and 5 kg weight). Because of the narrower sheets, there are more overlaps and a more robust roof, which can support heavier loads.

And lastly, Ondulin compact, a product especially made for intricate and tiny roofs. It is simple to lay on the roof and to transport in a standard automobile. The Ondulin compact sheets are the smallest, measuring just 100×75 cm, 2.6 mm thick, and weighing only 2.5 kg. T.To. the strength is even higher, the size is smaller, and the overflows are even bigger here. There are eight waves in each sheet.

Wavy bitumen sheets from Nuline, Aqualine, Bituwell and Ondura

Russia is a big fan of the Nuline brand of bitumen sheets because of their strength—the sheets are between 3.3 and 3.6 mm thick. They see him this way because, on the outside and in their hearts, this is the most typical Ondulin. Furthermore, the material is suitable for complex climate zones due to its extreme durability.

This Ondulin measures 1.22 by 2.05 meters, or 2.5 meters by two roof areas. A single sheet weighs 3.22 kg. These sheets are regarded as unique because of their width, which makes them ideal for installation. All laying happens 30% faster, and there are significantly fewer joints—and hence, fewer leaks. Place Ondulin from Nuline on a 61-cm-step crate and secure with nails to the top of each corrugation:

Using the same hats and technology, acrylic bitumen sheets are also fastened to nails. When it comes to the Bituwell Euro-Shifle, nails should always match the color of the roof and a closed decorative hat. However, the Ondur company’s nails feature a rhombo-shaped hat—a pretty unique design choice.

Stage III. Choosing fasteners for installation

Ondulin manufactures unique roofing nails for the installation of bituminous wavy sheets. They go by the name "metizes," or metal products.

These nails can be identified by their pronounced wide hat, which consistently presses the roofing sheet against the crate without causing any harm to it. Furthermore, there is no chance that the nail will penetrate with more force. Moisture is protected from corrosion by zinc anti-corrosion coating.

In addition, the hats themselves can be combined or made of one piece. These hats are composed of low-pressure polyethylene, which has the following characteristics: it is tight, impact-resistant, temperature-resistant, and UV-resistant:

To increase durability, the nail’s leg is composed of carbon steel. She lingers with a nail in the crate thanks to her ring profile. A screw jammed into the wall holds stronger than a screwed nail, as roofers like to joke. This idea is just being applied here!

Additionally, a unique conical shape makes it easier to clog nails; however, this makes it impossible to remove the nail from Ondulin afterwards. Ondulin nails are typically 3.55 mm in diameter and 75 mm in length.

They are painted in accordance with the same catalog as the roofing sheets in order to achieve the hat’s aesthetics for Ondulin, and the entire roof is hidden by this fastening:

Additionally, every producer of wavy bitumen sheets releases his fasteners. Some people think that the hats should be made smaller and invisible to avoid ruining the roof pattern, while others think that they should be made more profitably by making neat points on the slope and differentiating them by size and color.

Here’s an illustration of a fastening that is concealed from view:

Notably, certain varieties of euro-shifers from Western producers are installed using installation foam and specialized brackets rather than nails:

Take advantage of this mount if you see one on sale; it’s used to attach a piece of natural tile.

Stage IV. Preparation of sheets for installation

You will need the following instruments to cut ondulin: a hammer and a wood hacksaw. Secure the hacksaw with glue. To prevent her from becoming stuck in bitumen:

Electric saws that are circular and manual are an alternative:

The following is one method of cutting ondulin:

Make use of constructed bridges or stairs to navigate the roof during the installation process. Even though the sheet appears elastic, try to squeeze and stretch it no more than 1 cm.

"Onduline tile installation is a methodical procedure that guarantees roofing efficiency and durability. This comprehensive guide examines the fundamental methods and equipment needed for a successful installation. Every step of the process, from preparing the roof surface to installing the underlayment and repairing the Onduline tiles, is described in detail to give a thorough picture of what needs to be done. Knowing these techniques can help you install Onduline tiles confidently, whether you’re a professional roofer or a do-it-yourself enthusiast."

Stage V. Laying sheets on a crate

Modern ondulin can be placed on a metal or wooden crate:

Regardless of the manufacturer or sheet size, the ondulin crate is mounted using the same principle for all varieties:

1. If the roof angle is from 5 to 10 °, then you need a continuous crate.
2. If the angle is in the range from 10 to 15 °, the step of the crate should be 45 cm.
3. If the slope angle is from 15 ° and above – then 61 cm.

Use an OSP plate, moisture-resistant plywood, or a colored label with a thickness of 25 mm for a continuous crate, and a 40×60 mm cross section for a sparse.

Here’s an illustration of how basic a small gazebo needs a crate:

Make sure to check the rectangle’s slopes before installing. The temperature range for mounting sheets is -5 °C to +30 °C. They always lie on their sides, with the leeward side first:

Start the first row from the edge opposite the roof’s edge, which is below the roof. The second row starts with half of the sheet laid out. In order to prevent the angle from deforming later, it is crucial that the corner joint overlaps three sheets rather than four.

You’ll need twenty nails to secure the sheet. Just be careful not to drive nails into the wave that will overwhelm the following sheet. First, fasten the sheet at each of its four corners. Next, secure the sheet’s lower edge for every wave.

Verify that the sheet’s edges are secured to the crate. The sheet should therefore pull back five to seven centimeters from the crate’s edge. Place the cornice bar on top; it has designated bending areas (because the overhang is controlled). Additionally, use the aggregate to seal the space beneath the sheets from the cornice and to allow air to flow through.

You are in luck if you use the Smart Lock Castle, as these instructions will prevent haphazard sheet shifting. The cornice will have a clean, even finish. Attach every Ondulin Smart 20 sheet by placing it directly on the installation marking and arranging the sheets in a checkerboard pattern.

Lay half of the sheet at the start of each even row. Make sure the side overflows of the sheets land in the middle of the lower rows’ sheets. The height of the end overflow on Ondulin SMART is 12 cm.

After the sheets are installed, finish the roof’s construction with the following unique accessories: breathing tape onduleir Slim, universal ventilated aggregate, forceps, an apple, a horse, and special sealing ribbons of Onduband and Ondufles. Additionally, internal bends in the roof must be sealed using specific values, which are typically included with roofing sheets:

Once all of the sheets are installed, add unique finishing touches to the roof’s overhangs.

Installation Steps	Overview of Work Technology
Prepare Surface	Ensure the roof is clean and free of debris.
Install Underlayment	Lay down waterproof underlayment to protect against moisture.
Place Ondulin Sheets	Start at the bottom edge, overlapping each sheet to ensure a watertight seal.
Secure with Nails	Use nails to secure Ondulin sheets to the roof, following manufacturer guidelines.
Trim and Finish	Trim excess material and ensure edges are properly sealed.

There are several methodical steps involved in installing Onduline roofing tiles, which guarantee their longevity and effectiveness. It’s important to start by cleaning and smoothing out any imperfections on the roof surface. This prepares the tiles for correct adherence and alignment.

Installing the underlayment is crucial after that. This waterproof layer protects the roof from moisture and improves the roof’s overall insulation. When the underlayment is installed correctly, the roof will stay weather-resistant and dry.

Onduline tile installation starts after the underlayment is installed. These robust but lightweight tiles are made to be simple to handle and install. Because of the smooth interlocking of each tile, a strong barrier against wind, rain, and UV rays is formed.

Using the proper fasteners—usually screws or nails—and positioning them carefully to keep the tiles firmly in place while preventing water infiltration is the process of securing the tiles. During this phase, meticulous attention to detail makes a major contribution to the roof’s long-term integrity.

At last, to finish the installation, the entire roof must be inspected to ensure that every tile is firmly fixed and properly aligned. This comprehensive inspection guarantees that the roof serves as an efficient means of protecting the structure underneath it in addition to having a beautiful appearance.

Video on the topic

Reviews about Ondulin. Installation of Ondulin tiles from our partners center of roof and facades.

thirty. Ondulin tile installation scheme (installation principles are relevant for 2025)

Memot on the installation of the tiles of Ondulin – 5 simple steps

165. Ondulin and metal tile

Installation of Ondulin tiles with your own hands. Where he was tasted?