Endnovye device from corrugated board

Corrugated metal has become more and more popular as a roofing material because of its affordability, adaptability, and durability. Creating endnovye devices—specialized roof elements intended to improve functionality and aesthetics—is one creative use of corrugated metal. These gadgets, which are usually constructed of corrugated board, have several uses, including integrating solar panel installations, boosting natural light distribution, and improving ventilation.

Endnovye corrugated board devices are designed to be both functional and aesthetically pleasing to the overall roof structure. They frequently have features that allow you to control the temperature and airflow within the building, such as windows that can be opened or closed or adjustable louvers. Their adaptability makes them a sustainable option because it enhances comfort and increases energy efficiency.

These architecturally pleasing devices complement a range of building styles, from modern to rustic. The corrugated metal finish ensures resistance to weather elements like rain, snow, and UV exposure while adding a touch of contemporary flair. Because of this, they are appropriate for both commercial and residential properties that want to blend aesthetic appeal and usefulness.

All things considered, endnovye devices that incorporate corrugated metal are a combination of architectural design and useful innovation. These devices demonstrate how sustainability, durability, and style can be integrated into modern roofing solutions, whether they are used for ventilation enhancement, solar energy harvesting, or just to add aesthetic value.

The correct device of the yendova – types of elements and structures, installation rules

The roof’s yendova device appears to be a difficult and convoluted procedure at first glance. Because of this, a lot of customers would rather pay builders than handle this task themselves. We will go into further detail about what Endov is in the article and provide comprehensive construction instructions.

The appointment of a m land

Internal joints are inevitable on roofs of complex configurations that have multiple slopes at once. Snowy precipitation, rainwater, and various types of trash are frequently accumulated in these areas. It is also challenging to serve them quietly.

An element known as an endova, or m landing, is placed beneath the slopes along the inner angle of the roof. Its purpose is to shield the building from water seeping beneath the roof and to allow precipitation to be freely evacuated from the roof’s surface.

The following variables will determine the number of ends:

1. Roof configuration – cross -shaped, in the form of the letter T or g.
2. The presence of additional elements, in particular, attic and auditory windows.

The structure of the inner yendova

Typically, the corrugated board valley device consists of two planks bent at an angle that matches the angle of the neighboring slopes that have formed. In this instance, the upper element is primarily decorative, while the lower element functions as a drain.

The top section of the yndova may not always be installed. It is dependent upon the features of the roof as well as the kind of roofing. Nevertheless, the roof structure is reliable and waterproof thanks to the skillful execution of the unit connection.

The Mounting serves a few purposes, including:

1. The lower element of the yendovs is laid before fastening of the roofing material, and the upper one is completed by its completion.
2. Nails are not used for the installation.
3. They collect a groove from the bottom up, sealing the seams of the TEGOLA brand with bitumen mastic, bitumen-based sealants (Xtra Seal) or rubber (Tytan), or ICOPAL glue.
4. The internal yendov for corrugated board is made of galvanized steel or copper, and the outer – from roofing material. It is preferable to use a sheet of galvanizing with a polymer coating, which can withstand temperatures from -60 ℃ to 120 ℃.
5. To ensure additional roof insulation and prevent water flowing under the roofing material, a foam sealing gasket is glued along the ribs.
6. You can fix the lights either using the Klyammers for the sides, or by means of self -tapping screws at the edges.
7. The sides are made at least 2 cm in height so that water does not transfuse through them with strong rain.
8. The selection of Endov is in contact with the end parts of the rack of the crate.
9. In cases where Endov is assembled from several segments for corrugated board, they are laid with an overlap from 10 cm.
10. On roofs with flat slopes, enhanced waterproofing is required.

Varieties of mosses and their compounds

Depending on how the joints between the slopes are configured, corrugated board can be used to create a variety of roof values.

• Open mossy – found on low -coil roofs. In this case, additional waterproofing is required.
• Closed type of yendova – inherent in roofs, in which steep slopes are practically in contact, layering on the gutter.
• Intertwined yendova – in shape resembles a closed, however, in places of joints, fragments of the roofing are crossed, forming a single surface.

Think about each type’s characteristics.

Advantages of open jingeen include the following:

• Garbage does not accumulate on it.
• Precipitation is quickly evacuated from the surface.
• Installation work is performed quickly and easy.

When discussing the shortcomings, an Endov like this does not appear very lovely.

The following are some benefits of a closed or entwined loot:

However, the benefits of this design outweigh the drawbacks by a wide margin:

1. It is quite difficult to lay the intertwined yendov.
2. The process takes much more time.
3. Such a roof needs regular cleaning of garbage.
4. During the thaws between the raven strips, ice traffic jams may occur.

Schemes and types of crate on the rafter system

The Yendova device’s operation will vary depending on the purported roofing material and the rafter system’s design. This refers to the kind of crate in this instance. Manufacturers typically include recommendations on this account in the instructions for their roofing coatings.

The following types of collite can be used to lay a jail:

1. Continuous crate is performed for the subsequent laying of the soft roofing. In this case, the apple roofing carpet is made of waterproofing material. This laying method is the simplest.
2. Gable roof with an end, in which slate, corrugated board or tiles were used as a roofing, a crate for a gutter is made from 2-3 boards of 10 cm in width, laying them along the joints. The wider Endov is assumed, the greater the step of the crate will be.
3. For laying metal tiles between the main rails of the crate, the auxiliary.
4. Ondulin is laid on two boards of 10 cm wide with a step of 15 cm, so the m land will not sag.

Features of installation for corrugated board and other roofing materials

As was previously mentioned, loads from snow and rain sediments are applied to the house with the apple roof, and these should be cleared from its surface promptly. The installation of premium waterproofing is a crucial task in this regard. As a result, when installing the m landing, care should be taken with small details like correct roofing material trimming, adhering to a step between fasteners and supporting elements, seam tightness, and overlap sizes. The only thing that will differ slightly is the method used to install yendova from a continuous soft roofing system.

Installation is carried out as follows beneath the soft roof:

1. A lining carpet is placed on a continuous crate over the entire surface of the roof slopes. At the joints of individual sheets, it fits with an overlap.
2. Andy carpet is covered along the inner corner of the roof. Its edges are fixed with bitumen mastic, and then nailed with nails every 10-20 cm. About 20 cm of carpet should look out of the roofing material.
3. If the length of the jail exceeds 10 m, it is made of several parts fixed in the overlap by 15 cm. The edges of the planks are fixed with mastic.

The method of installing yendovs for metal, ceramic, or corrugated board tiles:

1. On top of the base, a layer of waterproofing is laid, which is nailed with nails every 20 cm.
2. Next, the lower element of the yendova with a slight overlap of the cornice board is laid, fixing it with self -tapping screws every 30 cm.
3. Along the edges of the lower straps of the gutters lay sealing ribbons.
4. The roofing material is cut along the m landing and fixed so that it does not reach the bend of 10 cm.
5. The upper element of the yendovs is mounted with an overlap of 10-12 cm.

You can use masking cord from the Karpo, Irwin, Interpool MT-2507, or Stayer brands to indicate the cutting line.

Setting up a m land beneath Ondulin:

1. Separate pieces of material for yendovs are attached with an overlap of 15 cm using self -tapping screws in the upper corners of each fragment.
2. The edges of the jail glue with a sealing ribbon.
3. Roofing along the corner element is cut, and then nailed into each wave as remotely from the middle of the gutter.

Features of the apple of yendova near the attic windows

Waterproof roof designs are also required for features like the attic door and windows. In order to apply the valleys in these locations, the lower element must be removed and coated properly.

The work schedule appears as follows:

1. A crate is stuffed near the attic window.
2. Calculate the length of the m land, taking into account the possible overlaps if it consists of several fragments.
3. Design the bending place in the lower part of the gutter.
4. Cut the cut areas in the opposite side of the side.
5. Endov is slightly lifted above the level of the roof, bringing the bars under it.
6. The edges are compacted with a ribbon.
7. The lower segment of the roofing is cut and slipped under the apples.

As a result, Endova is a very desired and crucial component of the roof that you can install yourself. All that matters is that you equip yourself with some information and resources.

Endova devices include the internal yendov for corrugated board, the house’s roof connection, and a plan for the rafter system.

Endova devices include the internal yendov for corrugated board, the house’s roof connection, and a plan for the rafter system.

How to make an yendov on the roof

The roof is becoming more and more useful beyond its practical use. It is frequently this feature, the building’s focal point. These kinds of roofs are made up of numerous planes joined at various angles. A portion of the connections have positive angles and are shaped like ridges, while the remaining connections have negative angles and are shaped like yends. A properly made roof is necessary to ensure that the attic is always dry.

End roofs

Sharp corners are formed on the roofs of complex shapes where auditory windows protrude. They can be found at the intersections of two slopes. The roofs are referred to as the apple, and the conjugation place is called Endov.

What is Endova?

Complexly shaped roofs are a great way to decorate a building and look very beautiful, but creating the devices and designs for them is difficult. These parts of the roof bear a heavy load because of their design elements because there is always a lot of snow and water. As a result, the crate is improved, and serious waterproofing measures are taken compared to the surface.

Features of the rafter systems

Depending on the roof’s shape, the rafters from various slopes in Endov can be connected at various angles. The rafters are attached from the slopes to the rafter leg, which is installed at the junction. When the joint is small (up to 2 m), it can be secured with two nails on each side; however, when the joint is long, a metal lining strengthens the connection.

The yendova’s rafter leg is appropriate where the largest load is located, or in the widest spot.

The backup is positioned as far below as possible.

The reinforced crate at the intersection of the two roof slopes is equipped with a device that varies depending on the kind of roofing material:

• Intermediate planks are installed under the metal tile in Endov – in the middle between the main. That is, in this place the step is half as much. The length of the additional strips should be larger.

Twice as many crates are produced.

Slate and ceramic tiles require two or three boards on each side beneath the profile.

There should be a 15 centimeter space beneath the Ondulin between the two boards.

Although we have provided standard sizes and requirements, certain manufacturers may have unique demands. You will receive installation instructions along with information on crate requirements and other technical details when you purchase roofing material. It is evident that following their advice is essential.

Endova device

Since every roofing material has unique properties, discussing the device as a whole is pointless. Consider the most well-liked ones independently as a result.

On a metal roof

As previously stated, the crate is made twice as frequently at the location of the ripe slopes, under a metal tile. This crate holds the lower Endova bar, which is a galvanized sheet with sides that are folded along the edges and a fold line in the middle. This component alludes to the inputs, which are complementary to the primary content. Two-meter pieces are used.

Jack of Metal

Below is where the Endov plank installation starts. The element’s edge begins slightly behind the roof’s ovation and is cut 20 to 30 mm below the overhang. Sewing (sip) is formed from this "remainder." Please take note that the apple bar should finish above any drain groove and behind any overhang. Water will flow into the roof if it is shorter than the overhang.

The joint is sealed with a sealant (you can use bitumen mastic to smear the entire overlap) before the next sheet is placed on top, with a 20–30 cm vision. Add as many sheets as needed, cut them, and secure them close to the skate.

The apple sheet can be secured in two different ways.

• special self -tapping screws closer to the edge;
• Klyaimers for the side.

Speaking on behalf of the participants

Ensuring tightness is the primary goal when setting up an Endova. This makes the second fastening option, which closes the hole with a rubber gasket but leaves no holes after it, the more appropriate choice.

An additional moment. Height should be present in the lower bar on both sides of the side, ideally greater than 2 cm. They are necessary to prevent the water from the slope from slipping beneath the metal tiles.

The sealing tape is glued on a fixed bar, about 20 centimeters away from the bend location. She applies a self-stick tape. The protective coating is peeled off and the tape is glued before installation. Subsequently, a metal tile is placed and then chopped to a distance of 60-100 mm from the center of Endova. Manufacturers do not advise placing the cuts closer to the center.

The sheets are fastened to the crate at regular intervals—20 to 30 mm below the step in the lower portion of the oxen. At least 250 mm should separate the fasteners from the bend.

The roof is now ready and can stay in this configuration after the metal has been fixed. However, not everyone finds cut sheets to be aesthetically pleasing. There is a decorative lining known as Upper Endov that serves to close them. It closes the sections and serves a decorative purpose, but it is frequently left unused.

Watch the following video to see the features of the Endova’s output over the auditory window.

From slate and corrugated board

Underneath these materials in Endov are several boards. They have a waterproofing strip attached to them that is connected to the membrane that is fixed to the slopes. Bilateral tape is used to connect the joints; the overlap should be at least 10 to 15 centimeters.

Additionally, the installation is similar to the previous example in that the roofing material is mounted after the lower yendny bar is laid and the universal seal is glued to it.

Endovs on a corrugated board roof

In this situation, sealant can be added in addition to the sealing tape. Applying the sealant strip to both sides of the roof bend is how it is done. There is still a sizable empty area following the installation of roofing material in the wave’s protrusions. Garbage, water, and snow can get there. Sealant is applied in layers to fill the gap and prevent this from happening.

When designing yendova for a profiled sheet, there are multiple options available:

• Open. This is when the sheets of corrugated board are cut off at a distance of 60-100 mm from the bend line. In this case, the bar and slices are visible. To close this "farm", a decorative gutter is laid on top of the roofing material that closes the cut line. He is attached to the crate with nails.

Remove the corrugated board from Endov.

Regardless of whether you select an open or closed slope connection, the pie’s overall device stays the same. The corporate stratum cutting technique remains unchanged.

The roof’s tile structure is precisely the same as when using a profiled sheet. The distinction lies in the fact that the continuous crate needs to be wider—at least 35 cm on each side of the joint. Endov features have a tile mount; some pieces are so severely broken that a regular lock cannot be used to secure them. Next, a soft, acid-resistant wire is inserted into the hole that has been drilled in the upper portion of the tiles. To fix the tile in the desired position, drive a nail into the crate and wrap the wire around it.

When it comes to ondulin, the crate beneath the yndova is made up of two boards that are symmetrically positioned 15 cm apart from the center rather than a single piece. Between them, a special gutter is installed.

A distinct indent is made in between the packed planks.

Installing starts below; proceed upward. After the shape is adjusted, the apple gutter’s first leaf is placed on the roofing material’s edge. Attached to the crate using nails from the top. The following sheet is laid with at least a 15 cm overlap.

The gutter’s upper fragment obstructs the bottom by at least 15 centimeters.

Roofing sheets are installed once the gutter is completely installed. Cut first, leaving a margin; the mark is positioned 5–6 cm beyond what is required. Cut off (jigsaw or grinder) along the marked line. Once installed, use the gutter protrusion to precisely mark the cut line. After being cut off a second time, replace. The Ondulin sheet weighs a little, so performing all the operations is simple.

Ondulin was cut twice, first roughly and then definitely.

Special roofing nails are used to secure the laid sheet, and a toned hat is included. It must be fixed in each wave by pulling back from the center line as much as is practical.

Anchored with unique nails

How to correctly construct the Yendov roof out of ceramic, ondulin, fraud, and metal tiles. Rules for end arrangements and work procedures.

We explore the creative applications of corrugated board for roofing solutions at "All About the Roof," with an emphasis on endnovye devices. Through the use of cutting-edge corrugated board technology, these devices offer a novel way to improve the functionality and longevity of roofs. This article examines how these gadgets give builders and homeowners a more affordable and ecologically friendly option by enhancing sustainability, weather resistance, and insulation. Learn how endnovye devices are revolutionizing roofing techniques and guaranteeing that modern construction is both environmentally friendly and practical."

The roof of the roof from corrugated board

The appearance of the house is greatly influenced by the roof’s design. An architect’s creative vision can occasionally simply astound the mind with the elaborate designs of each residential building’s roof. Many planes that intersect at various angles from colored corrugated board give an unusual and creative look.

However, there is another aspect to the roof’s complexity. It is imperative to keep in mind that the primary function of the roof is to shield the building from precipitation and snowfall. Simultaneously, every intersection where the roof slopes into one another poses a risk of compromised roofing integrity and possible leakage.

The inner angle formed by the meeting of two slopes is one of the most significant locations in the roofs of a complex form. This section of the end roofing. For corrugated board, it is Endova, which collects precipitation from the planes of intersecting slopes. Endov receives a stream of water that is gathered from a wide area during rainy seasons, and snow always builds up in it during the winter, adding to the strain on the rafter system.

As a result, you must understand how to make the yendova properly and pay close attention to the roofing assembly’s designs.

The device of the yendova roof from corrugated board

Endov, as previously indicated, is the point where the two roof slopes come together to form a gutter. For corrugated board, endova come in three primary varieties:

In the open Endov, the lower bar of the Endovs on corrugated board serves as a special gutter at the bottom of the roofing on the slopes. She does the job of directing water into the gutter.

The upper bar is installed in place of their joint once the corrugated board has been installed on the roof’s slopes. This component closes the roofing’s edges and serves a purely decorative purpose. The yendov device made of corrugated board is depicted in the figure.

The difference between an open and closed Yendov for corrugated board is that the roofing sheets at the junction are positioned in close proximity to one another. The upper level of the Endov is not installed in this instance.

Even more intricate is the roof yendov’s entwined design. In this design, the roofing sheets are bonded together in a checkerboard pattern at the connection junction.

The roof yendov, an open device, is most frequently used on corrugated board roofs.

The device of the rafter system with the end

The dependability of the rafter system at the internal junction of the slopes needs to be given extra consideration because of the increased load on the roof at the yendov location. The roof’s end rafter system is a highly intricate structure. Although it is preferable to leave the creation of the roof’s frame drawings to experts, there are a few fundamental guidelines that you should follow even if you can construct the roof in a single day with your own hands.

It is necessary to draft a rafter system plan before building a multi-sized roof with multiple yendov. It is necessary to conditionally divide the house into multiple rectangles in order to comprehend where to place the yendova. The bigger one is regarded as the principal one, and its rafter system will be connected to the roof frames of the smaller rectangles.

The lines of values will start at the intersection of the main room and its extensions. Additional crossbars are installed at the yend rafters’ points of leaning; these crossbars are supported by racks or spacers. The hip roof’s diagonal rafter legs are installed in a manner that is nearly identical. The rafters’ device is the most challenging.

Like any other rafters of the pitched roof, the rafters beneath the yendova are likewise mounted. The most important thing is to accurately join the slopes and firmly fasten them together before creating Endov.

If a crate with a step of 300 mm is sufficient for corrugated board with a small profile cut on roof slopes, then the yendov crate needs to be continuous.

How to install yendova on a roof from corrugated board?

Endov is easily mounted with his own hands once the rafter system assembly is finished and the dependability of each element’s attachment is examined by one another.

In order to create the continuous crate, more bars are first installed at the location of the Endov installation. In this location, further waterproofing must be done before laying Endov.

The roofing membrane in Endov is covered with a waterproofing tape that should be 5–10 cm wider than the lower valve. Although unique self-adhesive waterproofing tapes are occasionally utilized, they are typically just nailed to a continuous roof crate.

4. The Endov plank; 5. The corrugated board sheet.

The lower level of the yndovs is installed at the intersection of the roof slopes following the installation of extra waterproofing. Using an enlarged bar is preferable when the angle of the roof rain from the corrugated board is small. If the typical yendova bar has a width of approximately 300 mm on each side, then increase the width by two times.

Measure the length of the inner slope junction before installing the yendova. It is necessary to cut the yendov’s lower values so that they overlap by at least 150–200 mm. The overlap can be made even larger if the roof has a small slope.

Installing begins with the lower portion, with each subsequent bar overlapping the preceding one. Prior to the roofing installation, the values’ lower plane is put in place. The corrugated board sheets are launched into the yendova simultaneously, missing its axis by about 50 mm.

The values are installed on corrugated board following the coating sheets’ installation. The Endov’s upper bar serves primarily as decoration. Along the Endov axis, she seals the edges of the corrugated board sheets where they are trimmed.

It is important to pay close attention to the method used to attach the yndov to the profiled sheet. The lower bar’s tightness may be disturbed by the upper bar’s attachment to the crate because it is much lower. This can be prevented by using rivets to secure the yendova’s upper bar to the coating sheets.

Is your roof complicated? Then, you must unquestionably understand how to properly make a yendov. Visit the location to learn how to construct an Endov roof out of corrugated board, as well as how to use its device and seize it.

For commercial and residential buildings alike, corrugated metal roofing has become a popular option because of its affordability, adaptability, and durability. Whether you currently have an endnovye device installed or are thinking about getting one, corrugated metal roofs have a number of advantages that are worth mentioning.

First of all, corrugated metal roofs’ design facilitates effective water shedding, assisting in the prevention of water accumulation and possible leaks. This feature lowers the chance of structural damage over time, making it especially useful in regions that frequently experience high rainfall or snow accumulation.

Second, adding endnovye devices to corrugated metal roofs can improve energy efficiency and ventilation. Device placement that maximizes air circulation improves indoor temperature regulation and lessens the strain on heating and cooling systems.

Furthermore, it’s important to consider corrugated metal roofs’ aesthetic value. Because they come in an array of hues and textures, homeowners can select a look that accentuates the curb appeal of their home and blends in with its architectural design.

In conclusion, endnovye devices combined with corrugated metal roofing provide a workable option for both residential and commercial structures. They enhance a property’s overall aesthetic value, offer resilience to the elements, and encourage energy efficiency. When it comes to the long-term sustainability and comfort of your space, corrugated metal roofing with the right endnovye devices can be a smart investment, whether you’re planning a new construction project or looking to upgrade your existing roof.

Video on the topic

Installation of the lower metal yends on the skate with access to the main slope. 100 houses Tyumen

The best option for installing yendova. Endova device.

The internal device of the valleys under the metal tile / metal profile

Video Instructions for the installation of yendov for metal tiles/corrugated board

Endova Nizhnyaya for profiles 21c

How to correctly and smoothly install the inner yendov!Installation of apple.DIY End installation

Installing corrugated board on the roof with your own hands Part 3 Endov