How to choose and make a roof trench with your own hands

More than just shingles and rafters are involved in building or remodeling a roof; the goal is to keep your house safe and dry. The roof trench is one important component that is sometimes disregarded but is very important for diverting rainwater away from the building. An appropriately constructed roof trench, sometimes referred to as a gutter or eavestrough, can shield your foundation, walls, and landscaping from water damage. Here’s how to pick and lay a roof trench on your own.

Choosing the appropriate kind of roof trench is crucial, to start. They are made of different materials, each having advantages, such as steel, aluminum, and vinyl. Aluminum is strong and resistant to rust, but vinyl is lightweight and simple to install. Although steel is strong, it needs more upkeep. When making your selection, take into account your maintenance preferences, climate, and budget. Choose a style that also works well with your roofing and the architecture of your house.

Calculate the perimeter of your roof to find out how much trenching you’ll need. To optimize water drainage, it is generally recommended to dig a trench around the perimeter of the roof. To ensure effective water flow, make sure each trench section is sloping toward the downspouts. To ensure correct alignment and make any necessary adjustments to avoid pooling and overflow during heavy rain, use a level.

There are a few simple steps involved in installing a roof trench. Make sure the trench brackets are firmly fastened by first fastening them to the fascia board or roof edge. Then, depending on the type you selected, join the trench sections together using connectors or sealant. Sections should be cut to the proper length using a hacksaw, leaving room for a small overlap to ensure a snug fit. In order to prevent erosion and structural damage, attach the end caps and downspouts lastly, making sure they direct water away from the foundation.

For your roof trench to last a long time and work well, maintenance is necessary. To avoid clogging, remove leaves, debris, and sediment on a regular basis, especially in the fall when there are a lot of leaves. Check for leaks or drooping; adjust brackets or replace any damaged areas as necessary. Your DIY roof trench can successfully prevent water damage to your house, keeping it dry and structurally sound for many years to come, with the right maintenance.

A do-it-yourself roof trench is a cost-effective method to improve your home’s drainage system, guaranteeing effective water flow and averting potential damage. This guide makes things easier by providing you with step-by-step instructions and advice on how to choose the appropriate materials, schedule the installation, and carry out the project in a safe and efficient manner."

What is a roof horse

In the region of the closure where the horse is formed, the pitched roof is divided into multiple planes. The horse is always the highest point of the roof, even though its design may vary depending on the type of roof. Gable roofs exhibit the most noticeable area of closing the planes. There is also a horse in broken, four-sloping, and other comparable structures.

The following are this element’s functions:

  • The main purpose is the closure of the upper edges of the planes of the slopes;
  • ensuring free air circulation in space under the roof;
  • prevention of condensation, as a result of which the roof is subjected to deformation and decay;
  • Aesthetic addition of roof slopes for the finished appearance of the building.

Despite having a straightforward construction, the roof hobby keeps moisture out of the area beneath the roof. As a result, the roof’s lifespan is increased and the integrity of every component of the roof pie is guaranteed.

The design of the skate for the roof

A lengthy component installed at the roofing junction is called a roof hobby. The component may resemble a corner, a semicircle, or a figure element. The roofing material sheets under the skate should not be hermetically sealed, even though the roof edge is positioned horizontally. To establish a ventilation clearance that allows for air circulation, this is required.

A unique seal is used when positioning an element to keep out cold air while eliminating moisture. With a sealing insert, self-tapping roofing screws hold the horse to the rafter systems.

Calculation of the height of the skate for the roof of the house

Although there are other ways to determine the ridge’s height, mathematics is the most widely used method. The formula h = 0.5 × b × k is applied in this instance. This formula takes into account the B-shirin of the building, the H-sophisticated height of the roofing skate, and the K-coefficient of dependence on the roof’s slope, which is chosen based on the table. You can compute the height of the ridge on your own by using these indicators, but you can also use online calculators by entering the relevant information.

Table: coefficient value depending on the slope of the roof

The slope of the roof 5 10 15 20 25 thirty 35 40 45
Coefficient 0.08 0.17 0.26 0.36 0.47 0.59 0.79 0.86 1.0

The calculation’s mathematical example is best suited for pitched roofs, but the same principle can also be used to calculate a flat, single-sided roof’s height. Based on the type and design of the roof, which should be specified in the project, all the relevant parameters are first determined.

Elements for different types of roofs

Different materials are used to cover the roof; these materials vary in terms of appearance, characteristics, and installation technology. The option that lets you properly equip the roof is chosen based on the kind of material used.

Semicircular hobby for metal tiles

A semicircular horse with a seal and a skate bar for ventilation is used to equip the roof made of metal tiles. To stop moisture and dust from getting under the roof, a seal is positioned between the roofing and a semicircular skate. Specialized sealing elements composed of foamed polyethylene are available.

Polyurethane film is used to make universal seals, which provide effective dust protection without obstructing airflow. They are simple to install and come with a self-adhesive base. Universal seals are useful in their operation and safe for human health.

The material used to create self-expanding seals is polymer-impregnated foam. Fixing the slopes and covering the upper edges of the roofing material are the functions of elements.

Skating screws are used to fasten a semicircular horse to the seal. Installing ciebs from the ends gives the structure extra protection.

Profile for polycarbonate

Cellular polycarbonate roofing is frequently designed for arbors, outbuildings, greenhouses, and other comparable structures. The closing area of the planes, which is an angular or semicircular profile polymer material element, also requires a horse.

An attachment made of polycarbonate hobby is made with a thermogyib that has rubber bands for sealing. Dust and moisture beneath the roof are therefore ruled out.

Element for holly roofing

For a hollow roof, a semicircular element with mounted holes is utilized. The skate’s primary characteristic is that the corner element’s length is shorter than the roof’s length. Metal is a great material for a hip roof hobby, especially when covering the roof with metal tiles.

On a roof with four skeets, the ends of the skate are covered in unique components that resemble halves. The roof’s upper element is composed of multiple elements. As a result, the necessary length of bar is produced.


Wood does not withstand the effects of climate, so it is crucial to pay close attention to how the roof is arranged if it is to be made of wood. In this instance, the intersection of two rafter system bars forms the horse. A long, round log placed where the pitched roof’s planes are supposed to close could be the element.

The wood of larch, cedar, oak, and spruce is used to make tiles and skates. These materials are more resilient to changes in temperature, humidity, and other weather-related conditions.

Flexible tile roof

Air circulation beneath the roof is made possible by a ventilated horse, which is useful for roofs covered in soft tiles. By doing this, condensation is removed from the roof pie’s layers and all of the structural components are kept from decaying. On the horizontal slope of the slopes, the horse is outfitted.

A polymer corner with ventilation holes is a component of a soft roof. After the component is fixed to the rafter system, tiles are placed on top. As a result, the roof has a ventilated skate and a nice appearance.

Shifer roof element

Steel skates made of galvanized iron are frequently installed on slate roofs. These components vary in durability, are readily available, and are easy to install. Installing flat slate roof coverings is as easy as possible; all you have to do is screw or nail the galvanized corners into place. In this instance, a ventilation hole is provided by the skates’ inwardly bent edges.

The ridge tape that offers the best roof quality is used when installing the corner. The roofing sheets have an overlap that fixes the corner.

Important points of the installation of the skate

The skate for the roof is manufactured using a variety of materials. Galvanized steel corners and copper products are the most useful. A corrugated board roof is appropriate for a horse coated in colored polymer. The corner material is chosen based on the kind of roofing, enabling you to outfit the roof as effectively as possible.

Materials and tools for work

The straightforward method of attaching the corrugated board skate to the roof uses reasonably priced, premium materials. For work, the following elements will be required:

  • sealing with a self -adhesive side;
  • metal hobby of optimal shape;
  • thermal -shirts with sealing elastic bands, roofing self -tapping screws;
  • screwdriver, hammer, roulette, building level, knife.

Coal fastening

While there is no particular skill set needed to fix the corner, working on the roof always requires the use of a safety belt. Starting from one of the roof’s ends, the fastening is done in the opposite direction of the predominant winds. The following phases are included in the set of actions:

  1. The seal is glued to the inside of the ridge bar, at a distance of 3 cm from the edges.
  2. Corner elements are laid along the rib of the roof with an overlap of 150-200 mm. For round parts, the overlap is provided along the stamping line.
  3. The horse is fixed with thermogs or roofing self -tapping screws to the upper wave of profiled sheets. The step between the mounts is 300-400 mm.
  4. Special shutters are installed on the ends.

If you want to outfit the roof with a ventilated skate, you should buy a finished corner that has an air-circulating special design. The same technology used for the regular corner is used to attach the detail to the corrugated board.

Video: installation of the ridge and additional elements on the roof

Operation and finishing of the skate on the roof of the house

A seal, which is a polymer tape with a layer of self-adhesive adhesive, is frequently used when mounting the skate and organizing the roof. With this material, you can prevent the outer roofing layer from being affected by elements like snow, dust, or moisture. Construction product stores carry sealants, and manufacturers offer a variety of options for these tapes.

The key to effectively protecting the roof structure from rotting and deformation is the skate’s proper construction. Once the construction is finished, the horse can be decorated by matching the building’s design. For this, the following fixes are applied:

  • Skate decoration with carved parts is optimal for a wooden roof. On the metal you can use forged elements that are attached to the ends of the ridge or along the rib;
  • Figures made of wood or metal can decorate the horse from the end. The elements should not be too heavy, and their fastening is carried out by self -tapping screws to the rafter system through the roofing;
  • Forged weathercock in the form of original figures – an effective solution. The element is fixed on a special rack fixed with self -tapping screws.
Choosing Materials Research and select durable materials suited to your climate and budget.
Design Planning Measure accurately, plan the slope for water runoff, and ensure proper drainage.

The longevity and effectiveness of your roofing system can be considerably increased by selecting and installing a roof trench. Think about things like your region’s average rainfall, the kind of roof you have, and the climate when choosing the trench that is best for your house. These elements will aid in determining the trench’s size and capacity, which are essential for efficiently controlling water runoff.

To guarantee maximum performance, it is crucial to install the trench correctly after selecting the right one. The best places for the trench to be located along the roofline are usually those that are close to valleys or places where water can accumulate. To enable adequate drainage and keep water from collecting on the roof, make sure the trench slopes away from the house.

Pay close attention to the manufacturer’s instructions when digging a roof trench on your own. Make sure the trench outline on the roof is in line with your drainage plan by measuring and marking it first. To cut through the roofing material, use the proper safety equipment and tools, being careful not to harm the underlying structure. To stop leaks and strengthen the trench’s stability, make sure the edges are sealed properly.

The long-term functionality of your roof trench depends on routine maintenance. Check it from time to time for damage or accumulation of debris, particularly following severe storms. In order to keep the water flowing smoothly, remove any obstructions and look for wear or corrosion. You can protect your house from future water damage and prolong the life of your roof trench by taking preventative measures.

Video on the topic

DIY horse. Cheap horse

Roof skates with your own hands . Budget version

Oklupen – DIY wooden horse

💪 High -quality skate run of a gable roof with your own hands

How to make a horse"s horse

How to bend a galvanized metal, galvanizing and make a horse on the roof with your own hands.

How to make a horse on the roof yourself. I remember how my father taught. LCD self -hand

How to make a hobby on a roof

What do you think, which element is the most important for a reliable and durable roof?
Share to friends
Alexandra Fedorova

Journalist, author of articles on construction and repair. I will help you understand the complex issues related to the choice and installation of the roof.

Rate author
Add a comment