How to cover the roof with a metal tile with your own hands

Are you considering installing metal tiles on your roof? It’s an enjoyable do-it-yourself project that can improve the resilience and curb appeal of your house. Homeowners frequently choose metal tiles because of their durability and resilience to weathering. Whether you’re taking on a new construction project or replacing an old roof, this guide will take you through the crucial steps to complete it correctly.

Assemble your supplies and tools before you begin. Basic carpentry tools like a hammer, screwdriver, and tape measure are necessary, as well as safety equipment like goggles and gloves. Make sure the style and climate of your home are matched with the premium metal tiles you select. It’s important to plan ahead and measure your roof precisely to estimate how much tile, underlayment, and fastener you’ll need.

The first stage is to prepare the roof surface. Make sure the roof deck is debris-free, dry, and clean. To improve insulation and create a barrier against water infiltration, fix any damaged areas and install the proper underlayment. An adequate underlayment keeps your roof energy-efficient and waterproof.

Next, start arranging the metal tiles in accordance with the guidelines provided by the manufacturer. Work your way horizontally across each row, beginning at one corner of the roof. To keep straight rows, use a chalk line or a straight edge. Use the proper fasteners to firmly but gently fasten each tile, allowing for some natural expansion and contraction.

As you work, be mindful of small details like properly overlapping tiles and cutting them to fit around chimneys, vents, and other roof features. For accurate cuts, use a metal cutting saw or tin snips. Spend some time making sure every tile is firmly fixed and aligned; a well-installed roof will give your house years of protection and curb appeal.

Preparation: Measure the roof dimensions accurately.
Materials: Acquire metal tiles, screws, and necessary tools.
Installation: Start from the bottom, aligning tiles horizontally.
Fastening: Secure each tile with screws at designated points.
Finishing: Trim edges and ensure all tiles fit snugly.

Elements arrangement tips

Think about how some roof elements are installed; technologies are by their very nature universal.

Carnetic bar

It’s employed for two purposes:

  • Protection of the undercarbon space from slanting rain. Protects the rafter system and crate from getting wet;
  • improving the type of roof, hides wooden structural elements.

In the diagram, the cornice bar

Vital. The height of the metal tile stage should be represented by the difference in thickness between the first and subsequent rails of the crate. The first row of screws will actually be twisted in this location, which is above the other fixation points. In order to create emphasis on the sheet, the height of the first rail is raised.

Another small detail: the first and second bars of the crate should be 28 cm apart, and the remaining bars should be 35 cm apart. The characteristics of profiles and their linear sizes are to blame for this. Self-tapping screws are used to secure the barn for the cornice by the first rack.

Prices for cornice strips

The bar is cornice

Lower (water system) and upper yendovs

Here are the more intricate parts of the roof, and this is where leaks usually start. What distinguishes the upper and lower yendovs from one another? The first ensures that the roof is tight and offers water drainage. The second one merely serves as a decorative element, sealing off any uneven areas and extra fixing components.

  1. Lower Endova. The crate should be a continuous width ≈ 20 cm on each side of the adjoining. To increase the tightness before installing the metal element, you can use flexible bitumen materials for additional water protection. Water is diverted on a cornice bar, from which it enters the gutter right. Endova is fixed with self -tapping screws with flat heads or special metal stripes.
  2. Upper Endova. Decorative element, closes uneven cuts of tiles. Screwed by self -tapping screws to the crests of the wave. The color of the metal element should definitely coincide with the color of the roof coating.

Upper and lower endova

Work on the yendov must be done very carefully because any leaks found here could have disastrous effects. It is challenging to observe them since they are a component of a complicated structure. Water can remain unseen on the exposed side of the roof for extended periods of time, during which time wooden structures become wet and prone to decay.


Two water protection elements should be present in the traditional version: the upper and lower flexible materials that direct water to a long, galvanized metal plate that is attached to the gutter. The second serves a decorative purpose in addition to providing protection. Water from the bar seeps into the metal tile that is fitted in the chimneys of stroobes.

Symbolic entry components

Blood planks

They are placed where the roof meets the vertical brick structures and where there are slopes. They are made of the same material as metal tiles and resemble metallic strips bent at an acute or blunt angle. The strips are fastened to the sheet crests; in certain situations, wide crevices between the slopes can be sealed with rubber-foam sealant.


The metal tile’s proximity to the wall in the adjacent plan photo


Features a range of geometric shapes, including convex rounds and basic bent metal sheets. It is secured with long self-tapping screws, and the metiz’s dimensions should be two to three centimeters larger than the coating wave’s height. Special universal elements of fixation with ridge bar for ventilation are available.

Horse smeared for metal tiles

Prices for various types of roofing skates

Roofing horse

Snow holders

Can be plate, lattice, or tubular. used to stop snow from the roof from falling like an avalanche, which increases the risk of gutter damage and human injury.

The strongest lattice and tubing are fastened to the rafter system’s crate.

The plates are not strong enough to support heavy loads because they are screwed to the metal tile crests.

When deciding whether to install snow retainers, consideration is given to the building’s climate and the angle at which the roof slopes.

Snow holders prices

Snow holder

General styling tips

  1. Lifting to the roof. The length of the sheets can exceed six meters, they should be raised very carefully, not break or drop. For lifting, you need to prepare a special design and only serve on the roof using the ropes. It is not recommended to work in windy weather – large profiled sheets have significant sailing, it is very difficult to keep them in their hands. Especially when working at height and in an uncomfortable position.

Metal rising to the roof

Proceeding along the sheets

Layout of the sheets and their alignment on the cord

Fixation is only done when the crate is redirected. The extra components are screwed to the waves in only certain places. Sheets are fastened into each second transverse wave and one longitudinal wave. It is advised to add more fixation points if the sheets are extremely thin and the area is known for having strong winds. Likewise, you must take action in areas of overlap or adjacency. As a general rule, a square meter should contain about ten screws.


How the slopes’ metal tiles are fastened

You can begin coating the roof once the concept of styling technology has emerged, tools and equipment have been prepared, and materials have been purchased.

Prices for metal tiles

Metal tile

We’ll take you step-by-step through the process of installing metal roofing tiles on your own roof using this guide. We’ll go through everything you need to know to complete this project successfully, from surface preparation to tile arrangement and proper tile installation. Whether your goal is to achieve a modern aesthetic or increase the longevity of your home, our clear instructions and helpful advice will enable you to accomplish professional-looking results without hiring costly contractors."

If you’re thinking about using metal tiles to cover your roof, you’ve made a strong and attractive decision. Many homeowners prefer metal tiles because of their durability and resilience to various weather conditions.

Make sure you have the required instruments and supplies ready before you start. This comprises the actual metal tiles, the underlayment, the fasteners, and the proper safety equipment, such as goggles and gloves. A successful installation requires careful planning and preparation.

To estimate how many metal tiles you’ll need, start by taking precise measurements of your roof. Accurate measurements guarantee a seamless installation process and reduce waste. Before installing the tiles, it is also crucial to check the roof structure for any necessary repairs or reinforcements.

When installing, start at one corner of the roof and proceed carefully all the way across and down. Pay close attention to the manufacturer’s instructions regarding overlapping, fastening, and any other specifics pertaining to the metal tile system you have selected. This guarantees a proper and secure installation of the tiles.

Take periodic steps back to check alignment and make sure everything is straight and even as you lay each row of metal tiles. To prevent the need for revisions down the road, take your time on this step. Be mindful of the little things, such as cutting tiles to fit around corners and making sure all seams are correctly sealed.

After all of the metal tiles are installed, check the roof as a whole to make sure everything is tight and secure. This involves looking for any missing tiles or places that might require more care. When properly cared for, a metal tile roof can add decades to the lifespan and visual appeal of your house.

What do you think, which element is the most important for a reliable and durable roof?
Share to friends
Alexandra Fedorova

Journalist, author of articles on construction and repair. I will help you understand the complex issues related to the choice and installation of the roof.

Rate author
Add a comment