Installation of metal tiles with your own hands

Adding metal tiles to your roof can be a satisfying do-it-yourself project that improves the look and durability of your house. Knowing the procedure is crucial, regardless of your motivation—saving money on installation or just relishing the sense of accomplishment you get from finishing a project around the house yourself. You can successfully install metal tiles with your hands if you follow this guide.

The durability of metal tiles is one of their main advantages. Metal roofing tiles, in contrast to conventional roofing materials, are more resistant to fire, severe weather, and pest damage. They are available in an array of designs and hues, so you can match the style of your home to the appearance of your roof.

It’s crucial to gather all required tools and materials before beginning the installation. Usually, these consist of safety gear, metal tiles, underlayment, screws, a drill, and a measuring tape. Having everything ready will facilitate a more efficient and seamless process.

For an installation to be successful, preparation is essential. This include thoroughly cleaning and examining the surface of your roof, taking precise measurements, and cutting the tiles to fit. By taking the time to properly prepare, you can ensure a professional-looking finish and help avoid common mistakes.

Even for individuals with little experience, installing metal tiles can be a doable project with careful planning and attention to detail. You will have no trouble adding a stunning, long-lasting metal roof to your home and improving both its curb appeal and security by following the instructions provided in this guide.

The appearance and longevity of your roof can be improved by installing metal tiles yourself, which can be a satisfying and economical project. By using the correct tools and a little perseverance, you can successfully complete this do-it-yourself project and make sure your roof is both durable and fashionable. From preparing the roof surface to securing the last tile, this guide will take you step-by-step through the entire process, making it simple and doable for any motivated homeowner.

Pros and cons of the roof from metal tiles

Due to the many benefits that come with using metal for roofing, private homes typically use this type of material.

• Light weight – only 4-6 kg/m 2;
• wide color assortment;
• different models – the appearance of the waves;
• Environmental purity – there are no harmful substances in the composition of the material;
• high strength, subject to installation rules – due to the presence of a rib of stiffness (for example, material with a thickness of 0.5 mm withstands a load of 200 kg/m 2 or more);
• resistance to mechanical damage and temperature changes (minimum temperature expansion);
• low cost;
• The possibility of independent installation.

However, the metal tile has a major flaw: it makes noise when it rains or hails. Therefore, a residential building’s roofing cake must include a layer of noise insulation (such as polystyrene). A second layer of insulation or metal tiles coated with a specific soundproofing material can also serve this purpose.

The device of insulated and ineveled roof

Any type of household building, including private homes, can be covered with metal tiles. Residential buildings always have insulated roofs. The residential attic that is insulated has the most layers in its roof pie.

• metal tile – performs the protective function of the structure;
• noise insulation-extinguishes vibration and noise due to external effects on metal sheets;
• Chatter – the place of attaching the roof;
• Contractor – provides ventilation gap, does not allow condensate to form;
• waterproofing – protects the insulation from moisture;
• thermal insulation – holds heat inside the dwelling;
• rafter system;
• vapor barrier – prevents the penetration of moisture from the inside of the room;
• Internal casing.

It is much simpler to design the roof cake for the metal tile on the outbuilding or summertime vacant garden house:

• metal tile;
• crate;
• Contracuble;
• waterproofing;
• rafter system.

Installation of a roof of metal tiles

If you read the instructions carefully, calculate the material, and get the required tools ready, you can cover the roof with a metal tile on your own.

Necessary tools

It will be necessary to lay metal tiles on the roof:

• scissors for metal;
• electric drill;
• screwdriver;
• long rail;
• mounting tape;
• measuring device;
• hammer or kiyanka;
• marker or construction pencil.

Wearing mittens and plastic glasses as protective gear is advised when working.

Additionally, a sturdy staircase is required. The best tool to use for installation work on low outbuildings is a ladder. Additionally, the wooden staircase on the skate bar needs to be fixed in order to proceed along the building’s roof.

Calculation of materials

There are two widths for the metal sheet:

• total (1180 mm);
• useful (1100 mm) – the edges are not considered, since the sheets are glued over each other.

The useful width value is used in the calculation.

The roof must be measured in order to compute the required quantity of material.

1. How many rows will turn out. To do this, divide the width of the slope (over the cornice or skate) into a useful width of the sheet of metal tiles. For example, 5 m: 1.1 m = 4.5. Wound the resulting number to 5 rows.
2. How many sheets are in a row. To do this, the height of the slope must be divided into the length of the sheet of the metal tile (standard sheet 2.5 m). For example, 3.5 m: 2.5 m = 1.4. Round up to 2 pieces. If desired, you can order the length of the sheets equal to the height of the slope.
3. The amount of material. It turns out: for one slope you need 5*2 = 10 sheets, and for two – 20 sheets.

As soon as possible, the number of mounting elements must be determined. Three pieces and roughly 7-8 screws are needed for every square meter. 1 linear meter made up of yendovs and skates.

When selecting screws, you should consider:

• The distance between the turns – the screws with a large distance between the turns are suitable for attaching the metal tile to the wooden beam;
• Tip – screws with a sharp tip are attached to a metal -based metal -based metal;
• Length – long screws are suitable for fixing the additional elements, short – for connecting sheets and fastening the metal tile to the crate (2.8 cm);
• The shape of the hat.

Technology stuffing chatter under metal sheets

The metal tile doesn’t need a special base because of its light weight. The crate just needs to be nailed to the rafter system.

Simultaneously, it’s critical to accurately ascertain the board-laying step. Depending on how far apart the sheet bends on a specific model of metal tile, the first and second boards should be 25 to 35 cm apart. After that, the step rises by 5 cm and remains constant.

The crate is made continuous in trouble spots (yend placement, metal tile placement next to the pipe, and window proximity).

The technology of laying metal tiles on the roof

Typically, the right edge of a rectangular roof slope is where metal sheets are first placed. Next, each subsequent sheet is placed atop the preceding one. Every subsequent sheet is positioned beneath the one before it if you go in the opposite direction. The first sheet is positioned in the slope’s center, where its greatest height is, if the slope is triangular in shape. And already the others are bound to him on both sides. The installation process is carried out in the order listed below:

1. Put the first row of metal tiles. At the same time, do not immediately fix the sheets reliably. It is better to grab a little in one place, align them relative to each other and the edges of the slope. The first row should hang from the cornice by 5 cm.
2. Fix the metal tile. It is recommended to use only high -quality mounting elements, since the life of the roofing service directly depends on this. Set screws through the wave.
3. At the junction, part of the corner is cut off to remove the seal. The option of straightening the capillary ditch, which is located under the stamping line, is possible.
4. Repeat the process for the second and subsequent rows.
5. Fix the end strips. Put them over in 2 cm.

When handling metal sheets, there are a few guidelines to remember:

• move around the roof neatly, in comfortable shoes, step only on the lower part of the wave;
• The cut place immediately paint over with special paint. It is forbidden to cut a metal tile with a grinder, since the protective coating is disturbed;
• After installation, remove the protective film from the surface of the material: it will not look aesthetically pleasing if it crumbles under the influence of sunlight.

Video: installation of metal tiles with step -by -step instructions

Installation of a roofing skate

The horse and the roofing are composed of the same material. The process for installing it is as follows:

1. A special sealing tape is laid on the skate bar (aero -roller). Then its ends are pressed to the metal tile, and the tape is glued. Do this to prevent the hob of atmospheric precipitation under the hobby. Between the ribbon and the ridge bar, there should be a ventilation gap of 5 mm.
2. Fix the horse on the strips that are located on the ends of the metal tile, while it should be 2-3 cm. If a flat horse is used, then it is simply laid overlair.

Prior to installing the skate, make sure it is compatible with a roof of a similar design, as the slopes have a 45° angle. If not, there is a chance that moisture will seep into a subcutaneous area, necessitating a total roof replacement.

Video: how to install a horse yourself

Installation of yendov

If the roof has a complicated shape, yendov is located where two slopes converge.

Its installation must be carried out in compliance with the technology:

1. Along the junction of the roof slopes, fix an additional board on which the lower yendov will be mounted.
2. Start laying the values ​​from below. Elements lay over 15-30 cm.
3. Cut the lower bar along the cornice line.
4. If there were no bent edges on Endov, to make a selection, laying the seal.
5. Between the axis of the yendov and metal sheets, leave a gap of 8-10 cm. Fix the sheets with screws. Social parts are placed 1.5 cm from the stamping line and 25 cm from the axis of the Endov. If the mount was correct, then the metal tile will come into contact with the board.
6. Fix the upper decorative yendova on top of the roofing.

Video: the internal device of the yendova

Pipe decoration

To complete the output of the heating or ventilation pipe or ventilation, special aprons are used. The setup is as follows:

1. In the pipe, a strob is made with a depth of 1–1.5 cm.
2. A bar of the inner apron is introduced into it. The junction is sealed with sealant.
3. A metal tile is laid on top of the apron and fixed with self -tapping screws.
4. The parts of the upper apron are attached to the metal roof on top of the metal roof.

Video: how to correctly complete the pipe bypass

Grounding

If you plan to use metal sheets for your roofing, you should consider setting up grounding. An electrode pin or metal pipes (natural grounding) can be used for this. However, not sewer pipes, central heating, or pipes carrying flammable liquids.

The electrode pin’s cross section should be 50 mm 2 or greater, and the steel stripes should be 4 mm thick. The lightning receiver, a 200–1500 mm long steel rod with a 12 mm thick layer, is fixed to the roof. You can use a pipe with a sealed end for him. The lightning rod is connected to the pin, which is buried in the ground, by steel wire that has been galvanized and has a minimum cross section of 6 mm.

Video: a budget version of a thunderbate with your own hands

Installation of snow holders

Snow retainers are installed to the roof in their final stage. If a metal tile with a polyester coating was used, this component is required.

The Snow Exgresser must be arranged in a checkerboard pattern in one or two rows. You will need to use more planks as the slope’s angle of inclination increases. The same self-tapping screws that were used to install the roof can be used to secure them to the metal tiles.

Video: for what and how the snow retainers work, the rules for their installation

Metal Tile Installation Steps	Tools Needed
1. Prepare the Roof Surface: Clean and ensure it"s dry.	Roofing hammer, tape measure
2. Install Underlayment: Lay down roofing felt or synthetic underlayment.	Nails, utility knife
3. Begin at the Eaves: Start laying tiles from the bottom edge of the roof.	Roofing screws, screw gun
4. Overlap Correctly: Ensure each tile overlaps the previous row to prevent leaks.	Roofer"s gloves, ladder
5. Cut Tiles as Needed: Use tin snips or a metal saw to trim tiles to fit edges and around vents.	Safety goggles, chalk line

A worthwhile do-it-yourself project that improves your home’s resilience and visual appeal is installing metal roof tiles. You can save installation costs and achieve professional-looking results with proper planning and the right tools.

It’s important to fully prepare before you start. Make sure the structure of your roof is sturdy enough to hold the weight of metal tiles before anything else. To guarantee a level and smooth base, clear the roof’s surface of any debris and perform any required repairs.

Pay close attention to the installation instructions provided by the manufacturer. Start at one corner of the roof and carefully lay each tile, moving across and down as you go. To stop water seepage and wind uplift, make sure all tiles are firmly fastened using the proper fasteners.

Keep an eye out for details like alignment and overlaps as you work. The roof will look better and shed water more efficiently if the tiles are overlapped correctly and the lines are kept straight.

Examine your work closely once the installation is complete. Look for any areas that might need more fastening or loose tiles. To make sure the roof stays in excellent condition and to take care of any maintenance issues as soon as they arise, it’s also a good idea to inspect it on a regular basis.

You can have a long-lasting, aesthetically pleasing roof that increases the value of your house by carefully installing metal tiles and keeping up with maintenance.

Video on the topic

Installation of metal tiles with your own hands. Four -sided roof.

Installation of metal tiles with your own hands. Detailed description.

Installation of metal tiles with your own hands