Soft roof repairs – work technology

Of course! This serves as a succinct introduction to your work on "Work technology – Soft roof repairs":

If you want to keep the roofing system on your house reliable and long-lasting, you must repair any soft roof. Whether the cause is damage, aging, or weathering, taking quick action can save more expensive and time-consuming repairs in the future.

Soft roofs are flexible and long-lasting, but they do need some upkeep. They are usually composed of modified bitumen or asphalt shingles. Knowing the materials utilized, the typical problems they encounter, and the techniques used to address them are necessary to comprehend the technology underlying these repairs.

This article delves into the fundamental methods for soft roof repairs, giving homeowners useful advice on how to spot issues and carry out required repairs. Gaining an understanding of these repair technologies will enable you to make sure your roof weathers well and lasts longer.

Understanding the nuances of soft roof repair technology will enable you to make well-informed decisions regarding preserving the structural integrity and value of your home, regardless of whether you’re a do-it-yourself enthusiast or thinking about hiring a professional.

Preparation for repair

Regular inspections of the bitumber-containing soft roof are necessary because they make timely repairs of minor damage much quicker, simpler, and less expensive. Don’t wait for the amount of roll coating cracks and rot to worsen, or for water to seep through the deformed seam and into the roof pie.

When inspecting a flat roof from the outside, special attention should be given to the spillway system, which is frequently clogged with ice or trash during the thawing process. To evaluate the state of the rafter system, the pitched roof needs to be inspected from the attic side as well.

The most susceptible soft roofing material is roofing material, as its base is prone to decay and its bituminous layer is unable to withstand temperature and UV loads.

These days, garages and outbuildings are coated externally with this material. Bitumen membranes nowadays are more resilient to outside forces.

When inspecting the roof, it’s critical to locate any potential leaks:

• stratification or swelling of the roofing carpet;
• cracks, scuffs, gaps or other damage to the outer layer;
• lack of tightness of seams and adjacents;
• recesses on the surface in which moisture stagnes.

Two categories of repairs exist:

• current (damage is available on an area of ​​less than 40% of the total surface of the roof);
• Capital (the total area of ​​damage is more than 40% of the roofing area).

Repair of the pitched roof

It is required to make repairs if structural or crate element flaws are found during the rafter system inspection. You will need to take apart the rolled material roofing in order to replace the damaged section of the continuous crate. Two connected boards can be used to reinforce the decaying rafters from the inside out.

One way to repair a soft roof is to replace the coating entirely on a gable or single-sloping roof.

However, in most situations, flaws should be fixed during the initial stages of work:

• open the bubbles using a cross -shaped incision and dry them well, and then glue it with a bitumen mastic;
• Fill in mastic of cracks and small tears in the bitumen layer.

The old coating is then covered with one or two layers of fresh roll material.

One can easily apply fraud, which consists of bitumen mastic-bonded roller material fragments, to a single mechanical damage to a soft roofing system.

Repair of flat roofs

Disassembling the coating is the first step in replacing the soft roof. It is necessary to remove the outdated roofing carpet and assess the roof base’s quality. Should the cement-sand screed covering the house’s roof be significantly damaged, it will need to be disassembled and reinstalled. The soft coating is applied to the garage roof without the need for screed, but bitumen mastic must be used to seal the joints.

After being completely cleared of debris, the flat roof’s base is primed. Using a gas burner, a rolled bitumen membrane is applied after it has dried.

It is crucial to follow the recommended overlap size for the strips and to examine the fusion’s quality, promptly eliminating air bubbles and fixing any seam flaws.

There are a minimum of three layers to the material.

Overhaul involves significant labor and financial expenses. Local repairs of damaged areas are carried out whenever possible; berths of the necessary sizes are prepared and glued in the appropriate places. Furthermore, it’s common practice to repair "according to the old." In this instance, two or three more new coating layers are applied to an already-existing roofing carpet that has had its flaws fixed.

This approach is not advised if the roofing carpet has eight layers or more in thickness or multiple damage since the extra layers will greatly increase the load on the supporting structures.

Repair of the garage roof

You have the ability to fix the garage’s soft roof on your own. An ax should be used to cut the old coating off the concrete base by twisting and cutting it into stripes. After using a broom to clean the base’s surface, it is inspected for cracks and dents. A cement-sand mortar screed is applied if needed.

To prevent moisture from standing still on the surface, the roof’s inclination must be at least 3 to 5 degrees.

A layer of polystyrene or another heat-insulating material is laid down before the screed if the garage roof is to be insulated. A primer is applied to a dry screed or concrete base of the roof that has had the seams filled with bitumen and flooded with solution. This improves the coating’s adhesion and shields the roofing carpet from moisture evaporating from nearby buildings.

Starting from the bottom edge of the garage roof, roller material strips should be laid. Every subsequent row overlaps the preceding one by a minimum of 10 cm. In order to prevent the mounting seams from being positioned above one another, the subsequent coating layers are installed with a shift. A gas burner heats the substance. You can also apply bitumen mastic to the seams.

Applying a special protective layer is required if a pergmine or roofing material is used as an external coating. To do this, coat the entire garage roof with bitumen, cover it with stone chips or sand, and then roll it with a roller.

"We go over the key methods and procedures for fixing a soft roof in this post. Through the process, we walk you through the necessary materials and tools and identify common issues like leaks and wear. All of this is done in simple, understandable language. This guide intends to equip homeowners with the knowledge to properly maintain and restore the integrity of their soft roofs, whether it be through minor damage repair or more involved work."

New technologies

Liquid rubber can now be used to repair soft roofs thanks to technological advancements. With a lot of surface area and junctions to vertical structures, flat roofs can be reliably waterproofed using this method.

There are several varieties of mastic for roofing. Applying liquid rubber hot or cold, it can be a one- or two-component mixture.

Since liquid rubber is derived from water, it has several benefits for human health, including the absence of volatile chemicals and solvents. Furthermore, applying this coating is both better and faster than applying a roll of waterproofing membrane.

For independent roof repair, one-component liquid rubber for roofing is applied cold. Roofs Using two components of liquid rubber—a polymer-biomedic emulsion and an aqueous solution of calcium chloride—for roofing calls for specialized tools and expertise.

Roofing repairs and installation both use liquid rubber for cold installation.

With its assistance, subject to technology, you can obtain a monolithic surface that is characterized by:

• strength;
• durability (warranty period from 20 years);
• water resistance;
• tightness of adjacents to vertical structures (parapet, pipes, ventilation wells).

In terms of tightness, a 2 mm thick coating composed of liquid rubber is superior to a carpet made of melted material composed of 4-5 layers. Applying the material to a clean, dry surface is crucial.

With its strong adherence, liquid rubber adheres to a variety of surfaces, including metallic, concrete, and brick. This enables you to apply it over the outdated roofing carpet to repair soft roofs.

Operating temperatures for liquid rubber coating range from -45 °C to +98 °C. Unlike other bitumen-polymeric materials, using gas burners or hobs during installation is not necessary. If the roof’s exterior is coated with liquid rubber, which is unstable in the sun, protective coloring should be applied.

Of course! This is a brief summary of the article "Work technology – Soft roof repairs":

To ensure long-lasting results, repairing a soft roof requires careful planning and execution. The lifespan of your roof can be effectively extended by utilizing the appropriate materials and techniques and early issue identification.

Maintaining the integrity of a soft roof is largely dependent on routine inspections. Immediate detection and resolution of minor problems can avert future larger and more expensive repairs. It makes sense to plan for inspections at least twice a year, particularly following inclement weather.

When it comes to materials, using premium adhesives and roofing materials can greatly improve repair results. Whether you’re replacing damaged sections or sewing up small tears, using appropriate materials will guarantee weather resistance and durability.

Last but not least, the repair process can be significantly impacted by professional expertise. Seeking advice from skilled roofers or adhering to the manufacturer’s instructions for maintenance can yield insightful information and guarantee that repairs are completed accurately.

You can successfully manage and repair your soft roof, preserving its dependability and shielding your house from the elements by making routine maintenance a priority, using high-quality materials, and consulting an expert when necessary.

Video on the topic

Repair of a soft roof

Repair of soft roof shinglas

Repair of the soft roof of Yugtekhrov

Repair of soft roof without dismantling

Repair of a soft roof. Method sintering. Technology and Equipment of the Alfa-Soyuz gypsy.